Achieve Unrivaled Accuracy: The Browning X-Lock 2-Piece Scope Base for X-Bolt Rifles

For serious hunters, competitive shooters, and firearms enthusiasts, precision is not just a goal; it's a fundamental requirement. Every component of your rifle system plays a critical role in hitting your mark, and perhaps none is more foundational than your scope mounting system. If you own a Browning X-Bolt rifle and demand the utmost in stability, consistency, and zero retention from your optics, the Browning X-Lock Two-Piece Scope Base is engineered precisely for you. This innovative system addresses the core challenge of maintaining a perfectly stable connection between your rifle and your optic, ensuring that every shot counts.

Imagine the frustration of a missed shot on a prized game animal, or a target that’s just off-center during a critical competition, all because your scope shifted imperceptibly. Traditional scope mounting systems, often relying on just two screws per base, can be susceptible to the immense forces of recoil and repeated handling. Over time, or under strenuous conditions, these mounts can flex, loosen, or lose their precise alignment, leading to significant shifts in your point of impact and undermining your confidence in the field or at the range. The Browning X-Lock system was developed to eliminate these vulnerabilities, providing a rock-solid platform that transforms your shooting experience.

The Engineering Behind Unwavering Precision: Why the X-Lock System Excels

At the heart of the Browning X-Lock 2-Piece Scope Base's superior performance is its revolutionary four-screw per base design. Unlike conventional setups that secure the base only at its center points, the X-Lock system utilizes four robust screws strategically placed at each corner of the base. This "quad-lock" approach distributes mounting pressure more evenly across the rifle's receiver, creating an incredibly secure and rigid connection that virtually eliminates any potential for movement or flex.

Here’s a deeper look into the advantages this innovative design brings to your Browning X-Bolt:

• Enhanced Stability Under Recoil: High-powered cartridges generate substantial recoil. The four-screw design dramatically increases the sheer strength and resistance to linear and torsional forces, ensuring your scope base remains steadfastly fixed, shot after shot. This translates directly to superior zero retention, meaning your rifle's point of impact stays consistent, even after hundreds of rounds or extensive field use.
• Superior Alignment and Repeatability: By securing the bases at all four corners, the X-Lock system allows for more precise initial alignment with the rifle's bore. This meticulous fit reduces internal stress on your scope tube and ensures that your optic is perfectly oriented, contributing to enhanced accuracy and the ability to return to zero reliably after removal and reinstallation (though not recommended without re-zeroing).
• Reduced Scope Stress: When a scope mount flexes, it can induce stress on the scope tube itself, potentially affecting internal components or even damaging the optic over time. The rigidity of the X-Lock system minimizes this flex, prolonging the life and maintaining the optical integrity of your valuable scope.
• Optimal Foundation for Long-Range Shooting: For shooters pushing the boundaries of long-range accuracy, every micro-adjustment and every ounce of stability matters. The X-Lock bases provide an unyielding foundation, crucial for consistent performance when factoring in complex ballistic solutions and environmental variables.

Key Features and Specifications That Set the Standard

The Browning 12362 X-Lock 2-Piece Base isn't just about a revolutionary screw pattern; it's a meticulously crafted component designed to meet the rigorous demands of serious shooters.

• Premium Steel Construction: Crafted from high-quality steel, these bases offer exceptional durability and strength. Steel is renowned for its rigidity and resistance to wear and tear, ensuring that your mounting system will withstand years of heavy use, harsh weather conditions, and the repeated shock of recoil without compromising its integrity.
• Elegant Black Gloss Finish: Beyond its robust functionality, the bases feature a sleek black gloss finish. This not only complements the aesthetic of most modern Browning X-Bolt rifles but also provides an additional layer of corrosion resistance, protecting the metal from rust and environmental damage. The high-quality finish speaks to Browning's attention to detail and commitment to producing components that are both high-performing and visually appealing.
• Two-Piece Design: The two-piece configuration offers several practical advantages. It provides excellent access to the rifle's action for loading, unloading, and cleaning, particularly around the ejection port. This design also allows for greater flexibility in scope placement, accommodating a wider range of scope lengths and eye relief requirements. Furthermore, a two-piece design often results in a lighter overall weight compared to a single-piece rail, which can be a consideration for hunters who prioritize minimizing rifle weight.
• Precision Machined for Browning X-Bolt: These bases are specifically engineered for the Browning X-Bolt rifle, ensuring a perfect, snug fit with the rifle's receiver. This dedicated design eliminates any need for modifications or compromises, providing an optimal interface that maximizes the benefits of the X-Lock system.
• Includes Mounting Hardware: To facilitate immediate installation, the Browning 12362 comes complete with all necessary mounting hardware. This convenience ensures you have everything required to securely attach the bases to your X-Bolt rifle right out of the box.

Compatibility Essentials: What You Need to Know

Understanding the specific compatibility of the Browning X-Lock bases is paramount to ensuring a successful and secure scope mounting setup:

• Firearm Fit: These bases are exclusively designed for the Browning X-Bolt rifle. They will not fit other rifle models, even other Browning firearms that do not feature the X-Lock specific receiver interface. Always verify your rifle model before purchasing.
• Ring Compatibility: This is a critical distinction. The Browning X-Lock bases require Browning-style rings. They are specifically engineered to interface with Browning's proprietary ring designs. They will not accept Weaver-style or Picatinny-style rings. Attempting to use incompatible rings will result in a loose, unsafe, and inaccurate setup. Ensure you purchase Browning-branded or Browning-compatible rings to complete your mounting system.

Who Will Benefit Most from the Browning X-Lock Bases?

These scope bases are an essential upgrade for anyone who:

• Owns a Browning X-Bolt rifle: This is a direct, purpose-built upgrade for your specific firearm.
• Demands maximum accuracy and consistency: If you're tired of scope shift or inconsistent zeros, the X-Lock system provides the stability needed for true precision.
• Engages in hunting or competitive shooting: In high-stakes scenarios where a single shot can make or break your outcome, absolute reliability is key.
• Seeks long-term durability and performance: The robust steel construction ensures these bases will perform flawlessly for the life of your rifle.
• Wants peace of mind: Knowing your scope is locked down securely allows you to focus on the shot, not worry about your equipment.

Step-by-Step Guidance: Installing Your Browning X-Lock Bases for Optimal Performance

While it is always recommended to have scope mounting performed by a qualified gunsmith, installing the Browning X-Lock bases yourself is a straightforward process for the careful and mechanically inclined individual. Precision is key, and adhering to best practices will ensure the optimal performance of your new bases.

1. Safety First: Always ensure your firearm is unloaded and pointed in a safe direction before beginning any work. Remove the bolt for clear access and safety.
2. Clean the Receiver: Thoroughly clean the mounting surfaces on your rifle's receiver. Use a degreaser to remove any oil, grease, or debris. A clean surface ensures proper adhesion if using thread locker and prevents any foreign material from compromising the fit.
3. Prepare the Bases: Ensure the Browning X-Lock bases themselves are clean. Identify the front and rear bases, noting any markings or slight differences in length that indicate their correct position on the receiver.
4. Apply Thread Locker (Optional but Recommended): For maximum security against vibration and recoil, apply a small amount of non-permanent (e.g., blue) thread locker to the threads of the mounting screws before installation. This helps prevent screws from backing out over time.
5. Position and Secure the Bases: Place the bases onto the designated holes on the rifle's receiver. Start each of the four screws by hand to ensure they thread correctly, then lightly snug them down.
6. Torque to Specification: This is the most crucial step. Use a high-quality torque wrench with the correct bit. Consult your Browning X-Bolt owner's manual or the X-Lock base instructions for the precise torque specifications. Typically, scope base screws are torqued between 15-25 inch-pounds. Torque each screw incrementally in a cross-pattern (diagonal) to ensure even pressure and proper seating. Do not overtighten, as this can strip threads or damage the receiver.
7. Inspect and Verify: Once torqued, visually inspect the bases to ensure they are flush with the receiver and appear perfectly aligned. There should be no gaps or rocking.
8. Mount Your Browning-Style Rings and Scope: Once the bases are securely attached, you can proceed with mounting your Browning-style scope rings and then your optic. Remember to use a scope leveling kit to ensure your reticle is perfectly plumb with the rifle's bore.

Proper installation ensures that the revolutionary X-Lock system performs as intended, providing the stable foundation your precision optic deserves.

Why Choose Browning, and Where to Find Authentic Products?

Browning has been a name synonymous with quality, innovation, and performance in the firearms industry for over a century. Their commitment to engineering excellence is evident in products like the X-Lock scope mounting system, which addresses specific shooter needs with intelligent design. When you choose Browning, you're investing in a legacy of reliability and a product designed to enhance your shooting capabilities.

To ensure you are purchasing authentic Browning 12362 X-Lock 2-Piece Scope Bases and benefiting from their superior design, always acquire your firearms accessories from reputable dealers. For this specific product and a wide range of Browning accessories, we recommend purchasing from DEGuns or deguns.com. They offer genuine products and the expertise to support your shooting endeavors.

In conclusion, for any Browning X-Bolt owner looking to extract every ounce of accuracy and reliability from their rifle, upgrading to the Browning X-Lock 2-Piece Scope Base is not just an option—it's an imperative. Its robust steel construction, elegant black gloss finish, and groundbreaking four-screw X-Lock system provide an unparalleled foundation for your optic, ensuring consistent performance, superior zero retention, and ultimately, greater confidence in every shot you take. Elevate your shooting precision today.

Product Specifications Overview

Attribute	Detail	Additional Information
Brand	Browning	A leading manufacturer in firearms and accessories.
Model	X-Bolt X-Lock Two-Piece Browning-Style Scope Base	Specifically designed for superior optic mounting.
Firearm Fit	Browning X-Bolt	Exclusive compatibility with X-Bolt rifle models.
Color	Black Gloss	Durable, aesthetically pleasing finish.
Material	Steel	Ensures maximum strength and longevity.
Firearm Type	Rifle	Optimized for rifle scope mounting.
Mount Type	X-Lock	Innovative four-screw per base system for enhanced stability.
Rings Included	No	Requires separate purchase of Browning-style rings.
Includes	Mounting Hardware	All necessary screws for base installation are provided.
Pieces	2	Two-piece design for flexibility and access.
Weight	6.40 oz	Lightweight yet robust for minimal impact on rifle balance.
SKU	12362	Manufacturer's Stock Keeping Unit.
UPC	023614048152	Universal Product Code for identification.