Elevate Your Springfield XD: The Ultimate Burris FastFire Optic Mount for Superior Targeting

Are you a dedicated shooter aiming to unlock the full potential of your Springfield XD pistol? Do you find traditional iron sights limiting your speed and precision, especially in dynamic scenarios or at longer ranges? For Springfield XD owners seeking a transformative upgrade that enhances both performance and shooting enjoyment, the Burris FastFire Optic Mount (Part No. 410328), in a sleek Black Matte finish, stands out as an indispensable accessory. This precision-engineered mount is your gateway to the world of miniature red dot sights (MRDS), allowing you to seamlessly integrate a Burris FastFire series optic onto your beloved handgun without the need for expensive, permanent slide modifications like milling.

Imagine the crisp, clear sight picture of a red dot superimposed directly on your target, eliminating the need to align front and rear sights. Picture yourself achieving faster target acquisition, making quicker follow-up shots, and consistently hitting targets with accuracy that was once only possible with a rifle. This isn't just an accessory; it's a significant upgrade for competitive shooters, tactical operators, concealed carry permit holders, and recreational enthusiasts alike who demand the best from their equipment.

Why Upgrade Your Springfield XD with a Red Dot Sight?

The adoption of red dot sights on pistols has revolutionized handgun shooting. What benefits do they offer that traditional iron sights cannot?

• Lightning-Fast Target Acquisition: With a red dot, your focus remains on the target, not on aligning two separate iron sights. Simply place the red dot on your point of aim, and you're ready to fire. This translates to significantly reduced split times and quicker engagement, critical in both self-defense and competitive environments.
• Enhanced Accuracy and Precision: The single focal plane of a red dot sight eliminates the complexities of sight alignment, making it easier to achieve precise shot placement. This is particularly noticeable at extended distances where iron sights often fall short.
• Improved Low-Light Performance: The illuminated reticle of a red dot sight offers a distinct advantage in low-light conditions, where iron sights can be difficult or impossible to see.
• Easier for Shooters with Vision Issues: For individuals experiencing presbyopia or other vision challenges, a red dot sight can make shooting significantly more comfortable and effective, as the target and the reticle are both in focus.
• Faster Follow-Up Shots: The minimal head movement required to track the red dot during recoil allows for quicker re-acquisition of the target and faster, more accurate follow-up shots.

The Burris FastFire Mount: Precision Engineering for Your Springfield XD

This isn't just any mount; it's a Burris 410328 FastFire Mount engineered specifically for the Springfield XD platform. Designed with meticulous attention to detail, it ensures a rock-solid, low-profile attachment for your Burris FastFire II, FastFire III, or FastFire IV red dot sight.

Key Features and Design Philosophy:

• Custom-Engineered Fit for Springfield XD: This mount is not a generic solution. It's precisely machined to fit the existing rear sight dovetail of your Springfield XD pistol. This ensures a secure, wobble-free connection that maintains zero even under harsh recoil and demanding use.
• Seamless Red Dot Integration: The design provides a perfect mounting platform for the popular Burris FastFire series of red dot sights. The FastFire series is renowned for its compact size, robust construction, and clear optics, making it an ideal companion for a handgun.
• Low-Profile Design: Understanding the importance of maintaining a comfortable and snag-free profile for concealed carry or duty use, Burris has crafted this mount to sit as low as possible on the slide. This helps maintain the natural point of aim and allows for potential co-witnessing with suppressor-height iron sights, offering a crucial backup sighting system.
• Durable Construction: Crafted from high-quality, lightweight yet robust aluminum, the mount is built to withstand the rigors of recoil and everyday carry. Its black matte finish not only complements the aesthetics of most Springfield XD pistols but also provides corrosion resistance and reduces glare.
• Non-Permanent Installation: One of the most significant advantages of this mount is that it replaces your pistol's existing rear sight. This means no irreversible modifications to your slide are required, preserving the original integrity of your firearm while allowing you to experience the benefits of a red dot sight. Should you ever wish to revert to traditional iron sights, the process is straightforward.
• Enhanced Versatility: By adding a red dot sight via this mount, your Springfield XD transforms into a more versatile firearm, adaptable to a wider range of shooting disciplines and situations.

Compatibility and Installation Insights

The Burris 410328 FastFire Mount is designed to be compatible with a broad range of Springfield XD models. This includes, but may not be limited to, the standard XD, XD(M), XD Mod.2, and XD-S models, provided they utilize a standard rear sight dovetail that can be drifted out. It's always recommended to double-check your specific XD model's rear sight configuration to ensure a perfect fit.

Installation Process (General Guidance):

While professional installation by a qualified gunsmith is always recommended for optical sights, the design of the Burris FastFire mount facilitates a relatively straightforward process for those with appropriate tools and mechanical aptitude. The general steps involve:

1. Removing the Factory Rear Sight: This is typically done by drifting the sight out of its dovetail slot using a sight pusher tool or a brass punch and hammer. Care must be taken to apply force evenly and avoid damaging the slide.
2. Cleaning the Dovetail: Ensure the dovetail slot is clean and free of any debris or old Loctite.
3. Installing the Burris Mount: The FastFire mount slides into the clean dovetail. It's crucial to ensure a snug fit. Some mounts may require minor fitting (gentle sanding of the base) for a perfect friction fit, but often, they are designed to be a direct replacement.
4. Securing the Mount: Once positioned correctly, set screws (if provided) or staking methods are used to secure the mount firmly in place.
5. Mounting the FastFire Optic: The Burris FastFire optic then attaches directly to the mount using the provided screws, ensuring proper torque settings as per the optic's manual.
6. Zeroing the Optic: The final and most crucial step is to zero your new red dot sight at the range, adjusting the windage and elevation to ensure your point of aim matches your point of impact.

This non-permanent approach makes the transition to a red dot sight accessible and reversible, addressing common concerns about modifying firearms.

Who Will Benefit Most from This Upgrade?

This Burris FastFire Mount for Springfield XD is an exceptional choice for a diverse group of shooters:

• Competitive Shooters (USPSA, IPSC, IDPA, Steel Challenge): The speed and accuracy advantages offered by a red dot sight are undeniable in competitive shooting. Faster transitions, quicker splits, and improved accuracy on challenging stages can shave crucial seconds off your time.
• Tactical and Duty Users: For law enforcement or military personnel who rely on their sidearm in high-stress situations, the ability to acquire targets rapidly and maintain situational awareness is paramount. A red dot enhances this capability, especially in variable lighting conditions.
• Self-Defense Practitioners: In a self-defense scenario, seconds count. The intuitive aiming provided by a red dot can drastically reduce the time it takes to effectively engage a threat, offering a significant advantage when your life is on the line.
• Everyday Carry (EDC) Enthusiasts: Many concealed carry permit holders are embracing red dot sights for their EDC pistols. The slim profile of the FastFire combined with this low-profile mount ensures that your carry rig remains comfortable and concealable.
• Hunters: For handgun hunters, especially those pursuing small game or varmints, the precision offered by a red dot can lead to more ethical and successful harvests.
• Recreational Shooters and Enthusiasts: Even for those who simply enjoy range time, a red dot can make shooting more enjoyable and rewarding by making it easier to see your hits and improve your groups. It's a fantastic way to revitalize your shooting experience with your Springfield XD.

The Burris Advantage and Where to Find Your Upgrade

Burris Optics has a long-standing reputation for producing high-quality, reliable, and innovative optics and mounting solutions. Their commitment to precision and performance is evident in every product, including the FastFire series and its dedicated mounting systems. When you choose a Burris product, you're investing in decades of optical excellence and engineering expertise. The Burris 410328 FastFire Springfield XD Black Matte Mount is a testament to this legacy, providing a secure and optimized platform for one of the most popular miniature red dot sights on the market.

For those ready to transform their Springfield XD into a more precise, faster-handling, and more versatile firearm, this essential mount is readily available. Elevate your shooting game and experience the tangible benefits of a red dot sight on your pistol.

This crucial upgrade, along with a wide array of other premium firearm accessories and optics, is available through DEGuns. As a trusted source for shooting sports equipment, DEGuns provides access to the finest products, ensuring you can equip your Springfield XD with the absolute best. Visit deguns.com today to secure your Burris FastFire Optic Mount and embark on a new era of handgun performance.

Feature	Description	Details
Product Name	Burris FastFire Mount for Springfield XD	Black Matte Finish
Part Number	410328	Specific Burris identifier
Compatibility	Springfield XD Series Pistols	Fits most models with standard rear sight dovetail
Optic Type	Burris FastFire II, III, IV Series	Specifically designed for these MRDS
Material	High-Grade Aluminum	Lightweight and durable construction
Finish	Black Matte	Non-reflective, corrosion-resistant
Mounting Style	Rear Sight Dovetail Replacement	Non-permanent, no slide milling required
Benefit	Enhanced Target Acquisition, Improved Accuracy	Ideal for competitive, tactical, and recreational shooting
Availability	DEGuns	Purchase at deguns.com for a wide selection of accessories