The Ultimate Guide to Maintaining Your Firearms with RCBS 87059 Ultrasonic Weapons Cleaning Solution

For every dedicated firearm owner, maintaining the pristine condition and optimal performance of their weapons is not just a chore, but a critical aspect of responsible ownership. Whether you're a competitive shooter, a recreational enthusiast, a hunter, or a reloader, you understand that carbon fouling, lead residue, copper buildup, and general grime can significantly impact accuracy, reliability, and the overall lifespan of your cherished firearms. The traditional methods of cleaning, while effective to a degree, often involve laborious scrubbing, meticulous attention to hard-to-reach areas, and the use of harsh chemicals. This is where modern solutions, specifically ultrasonic cleaning, revolutionize weapon maintenance.

Introducing the RCBS 87059 Ultrasonic Weapons Cleaning Solution, a 32 oz bottle of concentrated power designed to tackle the toughest firearm residues with remarkable efficiency and safety. This specialized formula represents a leap forward in gun care, offering an unparalleled deep cleaning experience that simply cannot be matched by brushes and patches alone. When used with an appropriate ultrasonic cleaner, the RCBS 87059 solution penetrates every nook, cranny, and crevice, reaching areas that are impossible to clean manually, ensuring your firearms are not just superficially clean, but truly immaculate from the inside out.

Why Ultrasonic Cleaning for Your Firearms?

Many firearm enthusiasts often ask, "What's the most effective way to clean my gun?" or "How can I ensure my firearm is spotless without hours of scrubbing?" The answer increasingly points towards ultrasonic technology. Ultrasonic cleaners work by generating high-frequency sound waves that create microscopic bubbles in the cleaning solution. These bubbles, upon imploding, create tiny vacuum forces that literally blast away dirt, carbon, lead, and other contaminants from surfaces at a microscopic level. This process, known as cavitation, offers several distinct advantages for firearm maintenance:

• Unmatched Deep Cleaning: Unlike manual methods that primarily clean accessible surfaces, ultrasonic cleaning reaches into intricate parts like firing pin channels, trigger mechanisms, and the internal surfaces of barrels and suppressors, dislodging stubborn fouling.
• Time Efficiency: What might take hours of meticulous hand cleaning can be accomplished in minutes with an ultrasonic cleaner and the right solution. Simply disassemble your firearm, place the components in the ultrasonic bath, and let the technology do the hard work.
• Reduced Manual Labor: Say goodbye to tedious scrubbing. This method minimizes the need for elbow grease, making cleaning less of a chore and more of a quick, effective process.
• Uniform Cleaning: Every part immersed in the solution receives consistent cleaning, ensuring no area is overlooked.
• Enhanced Firearm Performance and Longevity: Regular, thorough cleaning prevents carbon buildup that can lead to malfunctions, reduces wear on moving parts, and helps maintain accuracy, ultimately extending the life of your valuable firearms.

The RCBS 87059 Advantage: A Solution Designed for Excellence

"What is the best ultrasonic cleaner solution for guns?" is a question frequently posed by those looking to invest in this technology. While many generic cleaning solutions exist, the RCBS 87059 Ultrasonic Weapons Cleaning Solution stands out as a purpose-built formula engineered specifically for the unique challenges of firearm residue. RCBS, a name synonymous with quality and precision in the shooting sports industry, has developed this solution with key considerations for firearm longevity and user safety.

One of its most significant unique value propositions is its non-ammoniated formula. Ammonia, while effective in some cleaning agents, can be corrosive to certain metals, particularly brass, and can have adverse effects on other sensitive materials found in modern firearms, such as aluminum alloys and various polymers. The RCBS 87059 avoids these risks, making it safe for a wide array of firearm components, including:

• Ferrous and non-ferrous metals (steel, stainless steel, aluminum, copper, brass, bronze).
• Plastics and polymers commonly used in modern firearms (Glock frames, AR-15 furniture).
• Wood (care should be taken, usually not immersed).

Beyond its safety profile, the RCBS 87059 is a powerhouse at removing the most common and problematic firearm residues:

• Carbon Fouling: The black, stubborn residue from gunpowder combustion that can bake onto surfaces and lead to reliability issues.
• Lead Residue: Especially prevalent in pistols and revolvers, lead buildup can be extremely difficult to remove manually but is efficiently dislodged by this solution.
• Powder Residue: All types of unburnt and partially burnt powder.
• Grime and Dirt: General environmental contaminants that accumulate during use.

Furthermore, this solution doesn't just clean; it also leaves a protective film on metal surfaces after cleaning. This anti-corrosion layer helps to inhibit rust and provides a barrier against future fouling, making subsequent cleaning sessions even easier. This unique benefit means your firearms are not only clean but also receive a layer of protection against the elements and operational wear.

How to Effectively Use RCBS 87059 Ultrasonic Weapons Cleaning Solution

For those wondering, "How do I use an ultrasonic cleaner for my AR-15 components?" or "What's the right dilution ratio?", here’s a comprehensive guide to maximizing the effectiveness of your RCBS 87059 solution:

Preparation:

1. Safety First: Always ensure your firearm is unloaded and cleared before beginning any cleaning procedure. Remove magazines and visually and physically check the chamber and bore.
2. Disassembly: Field strip your firearm according to the manufacturer's instructions. Separate components that can be safely immersed in the ultrasonic cleaner. Avoid immersing optics, electronics, or wooden stocks.
3. Rough Clean (Optional but Recommended): For extremely heavily fouled firearms, a quick wipe-down with a patch or brush can help remove the thickest layers of carbon and grime, extending the life and efficiency of your cleaning solution.

Mixing the Solution:

1. Dilution Ratio: The RCBS 87059 is a concentrated formula and must be diluted with water. The typical recommended ratio is 40 parts water to 1 part solution. For example, if your ultrasonic cleaner has a 1-liter (approx. 33.8 oz) tank, you would use about 0.84 oz (25ml) of RCBS 87059 solution. Always refer to the bottle's label for the most precise and up-to-date dilution instructions, as formulations can be updated.
2. Water Type: While tap water can be used, using distilled or deionized water is often recommended to prevent mineral deposits, especially if you have hard water in your area.
3. Temperature: Many ultrasonic cleaners have a heating element. For optimal performance, the solution should ideally be heated to around 130-140°F (54-60°C). This temperature range significantly enhances the cavitation process and the cleaning power of the solution.

Cleaning Process:

1. Submerge Components: Carefully place the firearm components into the ultrasonic cleaner's basket, ensuring they are fully submerged in the diluted solution. Avoid overcrowding the basket, as this can impede cavitation.
2. Set Timer: Most cleaning cycles for firearm parts range from 5 to 15 minutes, depending on the level of fouling. Heavily fouled parts may require multiple cycles or longer soak times.
3. Post-Cleaning Rinse: After the cycle is complete, remove the parts and thoroughly rinse them under clean, warm water. This removes any loosened contaminants and residual cleaning solution.
4. Drying: Dry all components immediately and thoroughly to prevent water spots or flash rust. Compressed air, a heat gun on a low setting, or a clean cloth are excellent for this. Some users also follow with a dedicated drying cycle in a specialized dryer or oven (at very low temperatures, check compatibility).
5. Lubrication and Protection: Once completely dry, apply a high-quality firearm lubricant to all moving parts and a thin layer of rust preventative oil to all metal surfaces, especially the bore, as per your firearm's maintenance schedule.

What Can You Clean with RCBS 87059?

The versatility of the RCBS 87059 solution, combined with an ultrasonic cleaner, makes it ideal for a wide range of firearm-related cleaning tasks:

• Pistol Components: Slides, frames (if material compatible), barrels, magazines (disassembled), trigger groups, small parts. "How to clean a Glock frame?" or "Cleaning a 1911 slide?" are common questions that ultrasonic cleaning can answer with ease.
• Rifle Components: Bolts, bolt carriers, gas pistons, gas tubes, flash suppressors, muzzle brakes, small parts, magazines. Excellent for cleaning stubborn carbon from AR-15 bolt carrier groups.
• Shotgun Components: Choke tubes, gas system components, small parts.
• Suppressors/Silencers: One of the most challenging items to clean manually due to their intricate baffle designs, suppressors greatly benefit from ultrasonic cleaning to remove carbon and lead buildup, which can affect performance and longevity.
• Reloading Brass Cases: Used brass cases, whether rifle or pistol, can be perfectly cleaned inside and out with this solution, preparing them for resizing and reloading. It removes primer residue, carbon, and other firing debris. This is a common method for reloaders asking, "How do I clean my brass for reloading?"
• Tools and Small Parts: Any small metal tools or components that require thorough cleaning.

Ultrasonic Cleaning vs. Traditional Methods

While traditional cleaning methods (patches, brushes, solvents, oils) have served firearm owners for generations, they often fall short in certain areas compared to ultrasonic cleaning with a dedicated solution like RCBS 87059.

Feature	Traditional Cleaning (Manual)	Ultrasonic Cleaning (with RCBS 87059)
Effectiveness	Good for visible surfaces, requires effort for hidden areas.	Unmatched deep cleaning, reaches internal and intricate components.
Time Investment	Can be very time-consuming, especially for thorough cleaning.	Highly efficient, cleans multiple parts simultaneously in minutes.
Effort Required	Significant manual scrubbing and detail work.	Minimal manual effort once parts are in the bath.
Residue Removal	Good for major fouling, may struggle with baked-on carbon.	Excellent for carbon, lead, powder residue, and microscopic dirt.
Safety for Parts	Depends heavily on solvent choice; can be harsh.	RCBS 87059 is non-ammoniated, safe for various materials.
Protective Film	Requires separate application of oil after cleaning.	Leaves a light protective film, inhibiting future corrosion.

For serious firearm owners and gunsmiths, the data points towards ultrasonic cleaning as a superior, more efficient, and ultimately more effective method for maintaining firearms in peak condition. The user outcome is clear: a cleaner, more reliable, and longer-lasting firearm.

Maintaining Your Ultrasonic Cleaner

To ensure the longevity and effectiveness of your ultrasonic cleaning setup:

• Change Solution Regularly: The RCBS 87059 solution, once used, will accumulate contaminants. Change the solution after several cleaning cycles or when it appears cloudy or heavily soiled.
• Clean the Tank: Periodically clean the inside of your ultrasonic tank to remove any settled residue.
• Store Solution Properly: Store the concentrated RCBS 87059 in a cool, dry place, out of direct sunlight and away from children.

Why Choose RCBS 87059?

The choice of cleaning solution is as important as the ultrasonic cleaner itself. Opting for the RCBS 87059 Ultrasonic Weapons Cleaning Solution means choosing a product engineered for firearm specific needs. It’s not just a generic cleaner; it's a testament to RCBS's commitment to quality and performance in the shooting sports world. Its unique formulation tackles specific gun-related residues, protects your investment with an anti-corrosion film, and does so without the risks associated with ammoniated cleaners. This solution builds trust by delivering consistent, superior results, ensuring your firearms are always ready for action, whether at the range, in the field, or for display.

When you're looking for the best tools for gun maintenance, and considering an ultrasonic cleaning system, the RCBS 87059 is the definitive choice for a powerful, safe, and efficient cleaning agent. It represents a smart investment for anyone serious about preserving the value, function, and accuracy of their firearms.

You can find the high-performance RCBS 87059 Ultrasonic Weapons Cleaning Solution 32 oz Bottle and other essential firearm maintenance supplies conveniently available at DEGuns.

Product Specifications & Key Features Summary

Feature	Description	Benefit
Product Name	RCBS Ultrasonic Weapons Cleaning Solution	Specialized formula for firearms.
Model Number	87059	Specific RCBS product for easy identification.
Container Size	32 oz Bottle	Concentrated formula, provides many cleaning cycles when diluted.
UPC	076683870599	Unique product identifier for retail and inventory.
Formula Type	Concentrated, Non-Ammoniated	Safe for a wide range of firearm materials (metals, plastics, etc.).
Cleaning Power	Effectively removes carbon, lead, powder residue, and grime.	Ensures thorough deep cleaning of intricate firearm parts.
Protective Film	Leaves a light, anti-corrosion film on metal surfaces.	Inhibits rust and provides protection against future fouling.
Recommended Dilution	40 parts water to 1 part solution (check bottle for precise instructions).	Economical usage, extends the life of the product.
Ideal Use	Firearms, firearm components, reloading brass, suppressors, small parts.	Versatile for comprehensive gun and shooting accessory maintenance.
Compatibility	Safe for most ferrous/non-ferrous metals, plastics, polymers.	Broad applicability across modern and traditional firearms.
Manufacturer	RCBS	Trusted brand in reloading and shooting sports equipment.