Elevating Your .30-06 Springfield Reloading: The Redding Type S Bushing Neck Sizing Die

For any serious reloader, whether a competitive shooter chasing sub-MOA groups, a dedicated hunter requiring ultimate reliability, or an enthusiast perfecting their craft, the pursuit of precision is paramount. The quality of your ammunition directly impacts rifle performance, and at the heart of consistent, accurate handloads lies meticulous case preparation. Among the most critical steps in this process is neck sizing, and for reloaders of the versatile .30-06 Springfield cartridge, achieving optimal neck tension and concentricity is key to unlocking its full potential.

This is where the Redding Type S Bushing Style Neck Sizing Die for .30-06 Springfield stands apart. Engineered with an unwavering focus on precision, this die is not merely a tool; it's an investment in superior ammunition. It addresses the common challenges of inconsistent neck tension, excessive bullet runout, and accelerated brass wear, transforming your reloading bench into a hub of consistent, high-performance cartridge production.

The Foundation of Accuracy: Understanding Neck Sizing

Before delving into the specifics of this exceptional die, it's crucial to understand why neck sizing is so vital. When a cartridge is fired, the brass case expands to fill the chamber, and the case neck expands to release the bullet. For subsequent reloads, this expanded neck must be resized to provide proper bullet grip (neck tension). Inconsistent neck tension leads to variable bullet release, which in turn causes fluctuations in muzzle velocity and, ultimately, poor accuracy.

Furthermore, concentricity – the alignment of the bullet with the case body – is equally critical. If the bullet is seated crooked, or if the case neck is not perfectly round and aligned with the case body, the bullet will not enter the rifle's bore symmetrically. This creates yaw or wobble as the bullet leaves the muzzle, severely degrading accuracy. Traditional full-length sizing dies often over-work the brass and can introduce concentricity issues by forcing the neck into a fixed dimension. The Redding Type S Bushing Die offers a nuanced solution.

Precision Redefined: Features of the Redding Type S Bushing Neck Sizing Die

The Redding Type S Bushing Neck Sizing Die is a masterclass in design, providing reloaders with unparalleled control over case neck dimensions. This specific die, optimized for the .30-06 Springfield, incorporates several innovative features that directly translate into improved ammunition quality and extended brass life.

The Revolutionary Bushing System

The cornerstone of the Type S die's performance is its interchangeable bushing system. Unlike conventional dies that resize the entire neck to a fixed internal diameter, this die utilizes precision-ground bushings that are selected by the reloader based on their specific case neck thickness and desired neck tension. For .30-06 Springfield reloaders, this means you can precisely control the amount of sizing applied, minimizing unnecessary brass working. This leads to:

• Customized Neck Tension: Achieve the perfect bullet grip for your specific bullet and load combination, ensuring consistent ignition and predictable muzzle velocities.
• Reduced Brass Fatigue: By only sizing the necessary amount, you reduce the stress on the brass, significantly extending the lifespan of your valuable .30-06 Springfield cases. This translates into more reloads per case, offering substantial cost savings over time.
• Optimal Bullet Seating: A precisely sized neck allows bullets to seat smoothly and consistently, contributing to overall cartridge integrity and accuracy.

Adjustable Decapping Rod for Tailored Sizing

The die features an adjustable decapping rod, a seemingly small detail with profound implications for advanced reloaders. This adjustability allows you to position the sizing bushing to resize only a portion of the case neck length. For those using fire-formed .30-06 Springfield brass in a specific rifle, this is invaluable. By sizing only the portion of the neck that holds the bullet, you avoid over-working the neck and maintain the precise fit of the case shoulder to your rifle's chamber, further enhancing accuracy and extending brass life. This partial neck sizing approach is a hallmark of precision reloading, ensuring minimal brass distortion and maximum consistency.

Self-Centering Bushing for Unmatched Concentricity

One of the most critical aspects of accurate ammunition is concentricity – ensuring the bullet is perfectly aligned with the case and bore. The Redding Type S Bushing Die achieves superior concentricity through its unique self-centering resizing bushing. This floating design allows the bushing to align itself perfectly with the case neck as it enters the die. This inherent ability to self-center minimizes bullet runout, ensuring that each .30-06 Springfield round you produce is as straight and true as possible. The result? Tighter groups on target and a notable improvement in your rifle's inherent accuracy potential.

Standard Size Button for Commercial Brass

The decapping rod is supplied with a standard size button. This feature is particularly useful for reloaders who are utilizing commercial .30-06 Springfield brass as-is, which may have varying internal neck diameters. The size button ensures a consistent internal neck diameter, preparing the case for reliable bullet seating even if the brass hasn't been extensively prepped or sorted. It's a pragmatic inclusion that accommodates the diverse needs of handloaders, from those just starting out to experienced users processing large batches of range brass.

Decapping Pin Retainer for Advanced Case Preparation

For the ultimate in precision, especially for those who sort and/or turn their .30-06 Springfield case necks for uniformity, a decapping pin retainer is also supplied. This ingenious component enables neck sizing without the use of the standard size button. When the size button is removed, the case neck is sized solely by the bushing, resulting in minimal expansion and contraction of the neck. This technique is preferred by competitive shooters and precision rifle builders who meticulously control every aspect of their brass preparation, as it further reduces brass working and ensures the most consistent and concentric results possible with their .30-06 Springfield cartridges. Note: This retainer is supplied with most Type S Bushing Dies, except for 17 and 20 Caliber variations.

Who Benefits Most from the Redding Type S Bushing Neck Sizing Die?

This die is an essential upgrade for a wide range of .30-06 Springfield reloaders:

• Precision Rifle Shooters: For disciplines like benchrest, F-Class, or long-range tactical shooting, where every fraction of an inch matters, the unparalleled concentricity and consistent neck tension provided by this die are non-negotiable.
• Dedicated Hunters: When a single, precise shot determines success, ensuring your .30-06 Springfield ammunition is crafted to the highest standards provides unmatched confidence.
• Enthusiasts Seeking Peak Performance: If you enjoy pushing the limits of your rifle's accuracy and understanding the nuances of ammunition optimization, this die offers the control you need.
• Reloaders Focused on Brass Longevity: Extending the life of your expensive .30-06 Springfield brass through minimal, precise sizing offers significant long-term value.

Mastering Your Redding Type S Die: Tips for Optimal Use

To fully leverage the capabilities of your Redding Type S Bushing Neck Sizing Die for .30-06 Springfield, consider these best practices:

1. Select the Correct Bushing: The most critical step. Measure the neck diameter of a loaded round (with your chosen bullet). Subtract approximately .002" to .003" from this measurement to determine your ideal bushing size for good neck tension. Experimentation with different bushings is recommended to find the perfect balance for your specific rifle and components. DEGuns offers a wide selection of Redding bushings to fine-tune your setup.
2. Case Lubrication: Apply a thin, even layer of quality case lube to your .30-06 Springfield cases before sizing. This prevents stuck cases and reduces wear on both the die and the brass.
3. Die Setup: Follow Redding's instructions precisely for setting up the die in your press. Ensure the die is properly adjusted to size the neck without contacting the case shoulder, unless you are using it in conjunction with a body die for minimal shoulder bump.
4. Decapping Rod Adjustment: Experiment with the adjustable decapping rod to determine if partial neck sizing benefits your particular .30-06 Springfield load and rifle. This is particularly effective with fire-formed cases.
5. Cleanliness is Key: Keep your die and bushings meticulously clean. A buildup of lube or carbon can affect sizing consistency.
6. Measure and Verify: Regularly check your sized case necks for consistency using a micrometer or dial caliper. Invest in a concentricity gauge to verify runout, helping you to confirm the die's superior performance.

Beyond the Die: The Redding Advantage

Redding Reloading Equipment has been a trusted name in the reloading community for decades, synonymous with quality, innovation, and precision. Their commitment to producing top-tier tools for reloaders is evident in the meticulous design and manufacturing of the Type S Bushing Dies. When you choose a Redding product, you're not just buying a tool; you're investing in a legacy of excellence and a promise of consistent performance. These tools are designed to last a lifetime and deliver repeatable, accurate results that meet the demands of even the most discerning shooters.

Frequently Asked Questions About Precision Neck Sizing

• Why should I choose a bushing die over a standard full-length sizing die for my .30-06 Springfield?
  A bushing die allows for precise control over the amount of neck sizing, avoiding over-working the brass. This results in more consistent neck tension, improved concentricity, and significantly extended brass life compared to standard dies that resize the entire neck to a fixed, often oversized, dimension.
• How do I select the correct bushing size for my .30-06 Springfield brass?
  The general rule is to measure the outside diameter of a loaded cartridge neck (with your desired bullet seated). Then, subtract between .002" to .003" from that measurement to determine your initial bushing size. This provides enough tension for most bullet retention. However, fine-tuning may be necessary based on your specific brass, bullet, and desired bullet pull.
• What's the difference between using the standard size button and the decapping pin retainer for my .30-06 Springfield cases?
  The standard size button (expander ball) ensures a consistent internal neck diameter, especially useful for mixed or commercial brass that may have varying internal dimensions. The decapping pin retainer allows you to remove the size button entirely. This is preferred for precision reloaders who sort and turn their case necks, as it prevents the neck from expanding and then contracting, minimizing brass working and potentially improving concentricity.
• Can this die really extend the life of my .30-06 Springfield brass?
  Absolutely. By precisely controlling the neck sizing and avoiding excessive brass working, the Redding Type S Bushing Die reduces the stress and fatigue on the case neck. This can lead to a significant increase in the number of reloads you get from each piece of .30-06 Springfield brass, saving you money in the long run.
• Is this die suitable for competitive shooting with .30-06 Springfield?
  Yes, it is highly recommended for competitive shooting. Its ability to produce ammunition with superior concentricity and consistent neck tension makes it a favorite among benchrest, F-Class, and long-range shooters who demand the utmost precision from their .30-06 Springfield rifles.

Conclusion: Your Path to Precision with the .30-06 Springfield

The Redding Type S Bushing Neck Sizing Die is more than just a component in your reloading setup; it's a commitment to achieving the highest levels of accuracy and consistency from your .30-06 Springfield rifle. By offering unmatched control over neck tension and concentricity, it empowers reloaders to craft ammunition that performs at its peak, shot after shot. Whether you're aiming for championship titles or simply the satisfaction of a perfectly placed shot in the field, this die provides the precision foundation you need. Available at DEGuns, it represents a pivotal upgrade for any reloader serious about maximizing the performance of their .30-06 Springfield ammunition.

Feature	Benefit	Application
Bushing System	Precise neck tension control	Customizing for bullet types
Adjustable Decapping Rod	Partial neck sizing	Optimizing for fire-formed brass
Self-Centering Bushing	Superior concentricity	Reducing bullet runout for accuracy
Standard Size Button	Consistent internal neck diameter	Processing commercial brass
Decapping Pin Retainer	Sizing without size button	For sorted/turned brass

Product Details	Value
UPC	611760711329
SKU	71132
Product Type	Neck Sizing Die
Caliber	.30-06 Springfield
Brand	Redding Reloading Equipment
Availability	DEGuns