Unlocking Precision and Performance: The Essential Redfield 47514 Weaver-Style Scope Base for Your Marlin 336

Are you a proud owner of a classic Marlin 336 lever-action rifle, seeking to enhance its accuracy and versatility with a modern optical sight? Perhaps you're a hunter looking to improve your target acquisition in challenging conditions, or a sport shooter aiming for tighter groups at the range. For anyone who demands reliability and precision from their beloved brush gun, the choice of a scope mounting system is paramount. This detailed guide explores the Redfield 47514 2-Piece Base, a robust and dependable solution designed specifically to bridge the gap between your Marlin 336's legendary handling and the pinpoint accuracy offered by today's advanced scopes.

The Marlin 336, a staple in American firearms history, is renowned for its quick handling, potent calibers like .30-30 Winchester and .35 Remington, and its proven reliability in the field. However, to truly unlock its potential, especially for those longer shots or in low-light scenarios, adding an optic is a transformative upgrade. This is where a high-quality scope base becomes the critical foundation. Without a rock-solid base, even the most expensive riflescope is prone to shifting, losing zero, and ultimately compromising your shooting performance. The Redfield 47514 is engineered precisely for this purpose, providing an unwavering platform for your chosen optic.

Why a Quality Scope Base Matters for Your Lever-Action Rifle

The unique characteristics of a lever-action rifle, including its cycling action and recoil impulse, demand a scope mounting solution that can withstand constant stresses. A flimsy or poorly designed base can lead to:

• Loss of Zero: Your scope shifts after a few shots, leading to missed targets and frustration.
• Reduced Accuracy: Inconsistent mounting means inconsistent shot placement.
• Scope Damage: Excessive movement can damage the scope's internal components.
• Safety Concerns: A loose scope can be distracting and unsafe during shooting.

The Redfield 47514 addresses these concerns directly. It's not just a piece of metal; it's an integral component of your rifle's accuracy system, designed to maintain a consistent point of impact shot after shot. This dedication to stability is a hallmark of Redfield products, a brand with a storied history in American optics and mounting solutions.

Delving into the Redfield 47514: A Closer Look at its Design and Features

The Redfield 47514 is a 2-piece Weaver-style base, specifically designed for the Marlin 336. Let's break down what these features mean for you:

• 2-Piece Design: Unlike a single, continuous rail, a 2-piece base consists of two separate sections—one for the front scope ring and one for the rear. This design offers several advantages for the Marlin 336:
  • Enhanced Ejection Port Access: It leaves the ejection port completely open, ensuring unhindered cartridge ejection, which is crucial for the Marlin's top-ejecting action. This prevents brass from striking the scope base, which could cause jams or brass deflections.
  • Flexibility in Scope Placement: A 2-piece design often allows for more flexibility in where you position your scope, which is vital for achieving optimal eye relief—the distance between your eye and the scope's ocular lens. Proper eye relief prevents scope bite and ensures a full, clear field of view.
  • Reduced Weight: Generally lighter than comparable 1-piece rails, contributing to the Marlin 336's inherent balance and quick handling.
• Weaver-Style Compatibility: The "Weaver-style" designation is incredibly important for versatility. Weaver bases feature parallel slots that run perpendicular to the rifle bore. These slots are slightly narrower than Picatinny slots but are compatible with a vast array of scope rings from numerous manufacturers. This means you have a wide selection of rings to choose from, allowing you to pair your Redfield base with almost any scope you desire. Many shooters find Weaver-style rings to be secure and reliable for hunting and general shooting applications.
• Durable Black Finish: The base features a non-reflective black finish that matches most rifle finishes and prevents glare that could spook game or distract you. This finish also provides corrosion resistance, protecting the steel components from the elements.
• Robust Construction: Crafted from high-strength materials, the Redfield 47514 is built to withstand the significant recoil generated by the Marlin 336's popular calibers. Its robust construction ensures that once your scope is zeroed, it stays zeroed, even after repeated firing and exposure to rough handling in the field.

Perfect Compatibility: The Redfield 47514 and Your Marlin 336

This scope base is engineered precisely for the Marlin 336 platform, ensuring a perfect fit and seamless integration. Whether your Marlin 336 is chambered in the venerable .30-30 Winchester, the hard-hitting .35 Remington, or another variant, the Redfield 47514 is designed to mount securely to its receiver.

Understanding the "Weaver-style" aspect is key to setting up your rifle. While often confused with Picatinny, Weaver bases have a slightly different slot dimension and spacing. This Redfield base, being Weaver-style, will accept all Weaver-compatible rings. If you have Picatinny rings, they may or may not fit perfectly; it's always best to match Weaver bases with Weaver rings for optimal security and alignment. This flexibility allows you to choose from a wide array of excellent scope rings on the market, tailoring your setup to your specific scope and shooting preferences.

Installing Your Redfield 47514 Scope Base: A Practical Guide for Marlin 336 Owners

One of the great advantages of a quality scope base like the Redfield 47514 is its straightforward installation process. While professional gunsmithing is always an option, many Marlin 336 owners can confidently install this base themselves with a few common tools. Here’s a general guide:

Tools You'll Likely Need:

• Screwdriver set: Specifically, bits that precisely fit the mounting screws (often Torx or hex, though sometimes flathead depending on the screws provided).
• Torque wrench (optional but recommended): Essential for applying the correct screw tension, preventing overtightening (which can strip screws or damage the receiver) or undertightening (which can lead to a loose base). Refer to the manufacturer's recommendations for torque values.
• Degreaser or rubbing alcohol: To clean the screw holes on the receiver.
• Blue Loctite (non-permanent threadlocker): Crucial for preventing screws from backing out under recoil.

Step-by-Step Installation Process:

1. Safety First: Always ensure your rifle is unloaded. Double-check the chamber and magazine.
2. Clean the Receiver: Use a degreaser or rubbing alcohol and a cotton swab to thoroughly clean the screw holes on the top of your Marlin 336's receiver. Any oil or residue can prevent the screws from seating properly or the Loctite from adhering.
3. Position the Bases: Place the two Redfield 47514 bases onto the receiver, aligning the screw holes. Typically, one base is for the front of the receiver, and the other for the rear. The specific orientation may be indicated by arrows or simply by how they align perfectly with your receiver's contours.
4. Apply Loctite: Apply a small drop of blue (non-permanent) Loctite to the threads of each mounting screw. A little goes a long way. Avoid getting it on the base itself.
5. Insert and Hand-Tighten Screws: Insert the screws into the holes and hand-tighten them until they are just snug. Do not apply excessive force at this stage.
6. Progressive Tightening: Using your screwdriver (and ideally a torque wrench), progressively tighten the screws. For a 2-piece base, you'll typically alternate between the front and rear screws of each base, tightening in small increments to ensure even pressure. If using a torque wrench, tighten each screw to the manufacturer's specified torque value (usually around 15-20 inch-pounds for scope base screws, but always verify).
7. Final Check: Once all screws are tightened to spec, visually inspect the bases to ensure they are firmly seated and do not wiggle. Allow the Loctite to cure for the recommended time (typically 24 hours) before mounting your scope or firing the rifle.

Common Mistakes to Avoid:

• Overtightening: Stripping screws or threads is a common and costly mistake. Use a torque wrench.
• No Loctite: Recoil will inevitably loosen screws without a threadlocker.
• Dirty Threads: Residue prevents proper seating and Loctite adhesion.
• Using the Wrong Screwdriver Bit: Can strip the screw head.
• Impatience: Allowing Loctite to cure is essential for a lasting bond.

By following these steps, you can ensure a secure and reliable foundation for your Marlin 336's optical system.

Transforming Your Shooting Experience: Real-World Applications

The Redfield 47514 base doesn't just hold a scope; it opens up a world of enhanced shooting possibilities for your Marlin 336.

• Hunting Scenarios: Imagine hunting deer in dense woods where shots are often quick and at moderate distances. A low-power variable scope mounted on the Redfield 47514 allows for rapid target acquisition while providing magnification for precise shot placement through brush. For hog hunting, where quick follow-up shots are common, the unobstructed ejection port of the 2-piece base ensures flawless cycling. In open country where longer shots might present themselves, the stable platform ensures your .30-30 or .35 Remington bullet lands exactly where you aim.
• Sport Shooting: At the range, a scope enhances your ability to identify your impacts, make precise adjustments, and group shots consistently. Whether you're plinking steel or refining your technique, the improved sight picture provided by an optic on a secure base helps you become a better shooter.
• Caliber Synergy: The classic calibers of the Marlin 336, such as the .30-30 Winchester, are known for their effectiveness within common hunting ranges. Pairing these calibers with a reliable scope mount system allows you to maximize their inherent accuracy, making you more confident in your ethical shot placement. The .35 Remington, a powerful round for medium to large game, also benefits immensely from the precision a scope offers, especially in challenging lighting conditions.

Maintaining Your Optics System: Longevity and Performance

To ensure your Redfield 47514 base and your entire optics system continue to perform flawlessly for years to come, regular maintenance is key:

• Periodic Inspection: After several range sessions or a hunting trip, visually inspect the base and screws for any signs of loosening or damage.
• Cleaning: Use a soft cloth to wipe down the base and surrounding receiver area. Avoid harsh chemicals that could damage the finish.
• Retightening (if necessary): If any screws feel loose, gently retighten them to the specified torque values, reapplying blue Loctite if they were significantly loose.
• Environmental Protection: While the black finish is durable, always store your rifle in a clean, dry environment to prevent rust, especially after exposure to moisture.

Addressing Key Questions About Scope Mounts for Marlin 336

Users often have specific questions when considering scope mounts for their lever-action rifles. Here are answers to some common inquiries:

• Is a 2-piece base better than a 1-piece for a lever gun? For the Marlin 336, a 2-piece base like the Redfield 47514 is often preferred due to its open ejection port design. This ensures smooth and reliable cycling, preventing brass from hitting the base. While 1-piece rails offer continuous mounting surface, they can obstruct the 336's top ejection, leading to potential malfunctions.
• How durable is the finish? The black finish on the Redfield 47514 is designed for rugged outdoor use. It's resistant to abrasions and corrosion under normal hunting and shooting conditions. Regular cleaning and proper storage will help maintain its appearance and protective qualities.
• Can I install it myself? Yes, with basic tools and a careful approach, most individuals can successfully install the Redfield 47514. The step-by-step guide provided above offers a solid foundation. If you're unsure, consulting a qualified gunsmith is always a good option.
• What kind of scope rings do I need? Since the Redfield 47514 is a Weaver-style base, you will need Weaver-compatible scope rings. These are widely available from various manufacturers in different heights to accommodate your specific scope's objective lens size.

The Redfield Advantage: A Legacy of Trust and Performance

Redfield has been a trusted name in the shooting sports community for generations. Known for producing reliable and high-quality optics and mounting solutions, Redfield products embody a commitment to performance and durability. The Redfield 47514 scope base continues this legacy, offering Marlin 336 owners a practical, dependable, and aesthetically pleasing way to upgrade their rifle. It perfectly blends the traditional appeal of a lever-action firearm with the modern demands for optical precision, ensuring that your classic rifle can compete with contemporary designs in terms of accuracy and utility. Choosing Redfield means investing in a product that is designed to perform in the field when it matters most.

Your Trusted Source for Redfield Mounts: Discover DEGuns

When you're ready to elevate your Marlin 336's performance with the Redfield 47514 Weaver-Style Scope Base, look no further than DEGuns. As a leading retailer of firearms and accessories, DEGuns offers a comprehensive selection of Redfield products, including this essential scope base, ensuring you get genuine, high-quality gear. At DEGuns.com, you'll find not only the Redfield 47514 but also a wide array of compatible Weaver-style scope rings and optics to complete your setup. Their commitment to customer satisfaction and extensive inventory makes DEGuns the ideal destination for all your firearm accessory needs. Invest in the precision and reliability of Redfield mounts, available exclusively through DEGuns, and transform your Marlin 336 into an even more capable and accurate shooting machine.

---

Redfield 47514 Product Specifications

Feature	Detail
Product Name	Redfield Mounts 47514 2-Piece Base
Compatibility	Marlin 336 Rifles
Rail Type	Weaver Style
Design	2-Piece
Finish	Black
UPC	076683475145