Restore Peak Performance: The Essential Remington 12 Gauge Gas System Kit for Your 1100 or 11-87

For countless shotgun enthusiasts, hunters, and competitive shooters, the Remington 1100 and 11-87 represent the pinnacle of semi-automatic shotgun design. Renowned for their smooth operation, light recoil, and unwavering reliability, these firearms have earned their legendary status through decades of dependable performance in the field and on the range. But even the most robust machines require regular maintenance to sustain their excellence. At the heart of these gas-operated shotguns lies a finely tuned gas system – a critical assembly that dictates their cycling efficiency and overall reliability.

Is Your Remington 1100 or 11-87 Showing Signs of Wear?

If you've noticed your trusted 12-gauge Remington 1100 or 11-87 experiencing inconsistencies, such as failures to eject spent shells, difficulties feeding new rounds, or an increase in felt recoil, the problem likely points to a worn or compromised gas system. These symptoms are common indicators that the vital components responsible for harnessing propellant gases to cycle the action are no longer performing optimally. Imagine the frustration of a missed shot on a fast-flying pheasant, a crucial target in a sporting clays tournament left unbroken, or a moment of hesitation in a critical defensive scenario – all due to a sluggish or unreliable cycling action.

This is precisely the challenge that the genuine Remington 12 GA Gas System Kit (UPC: 047700192581) is designed to solve. It’s not just a replacement part; it’s an investment in the continued reliability and longevity of your cherished firearm. This comprehensive kit provides the essential components needed to rejuvenate your shotgun's gas system, restoring it to factory specifications for consistent, reliable operation.

Understanding the Core of Your Shotgun: The Gas System Explained

The genius of the Remington 1100 and 11-87 lies in their gas-operated design. When a round is fired, a small portion of the expanding gases behind the shot charge is vented through ports in the barrel. These gases are then directed into a gas cylinder, where they act upon a gas piston. The piston, in turn, drives the action sleeve and operating rods rearward, unlocking the bolt, extracting the spent shell, and cycling the action to load a fresh round from the magazine. This intricate dance of components relies on precise sealing and smooth movement.

Over time, through thousands of firing cycles, the extreme heat, pressure, and abrasive nature of gunpowder residue can take a toll on these critical parts. The gas seal (often an O-ring or a set of rings) can harden, crack, or lose its elasticity, leading to gas leakage. The gas piston itself can become pitted, fouled, or worn, reducing its efficiency. When these components degrade, the gas system becomes less effective at capturing and utilizing the gas energy, resulting in insufficient force to reliably cycle the action. This leads to the frustrating issues of "short stroking" (where the action doesn't fully cycle) or failures to eject, leaving you with a dead gun when you need it most.

Introducing the Remington 12 GA Gas System Kit: What's Inside?

This genuine Remington maintenance kit provides the essential components to restore your 12 gauge 1100 or 11-87 to its original operational efficiency. While specific contents can vary slightly by manufacturing run, a typical kit includes:

• Gas Piston: This crucial component directly interfaces with the propellant gases, translating their energy into mechanical force to cycle the action. A new, unblemished piston ensures optimal gas capture and smooth movement within the gas cylinder.
• Gas Seal (O-Rings/Sealing Rings): These seals are vital for preventing gas leakage, ensuring that maximum gas pressure is applied to the piston for reliable cycling. Worn or damaged seals are a primary cause of short stroking and can significantly impact your shotgun's performance, especially with lighter loads.

By replacing these key parts, you address the most common points of wear and tear within the gas system, ensuring your shotgun can harness the energy of each shot efficiently to cycle consistently, whether you're firing heavy magnum loads or lighter target ammunition.

Unlocking Peak Performance: The Benefits of a Renewed Gas System

Investing in a genuine Remington Gas System Kit offers a multitude of benefits for any dedicated owner of an 1100 or 11-87:

1. Restored Reliability: This is the primary and most critical benefit. A properly functioning gas system ensures consistent cycling, virtually eliminating frustrating failures to eject or feed, short stroking, and other common malfunctions caused by gas system wear.
2. Consistent Cycling Across Ammunition Types: A worn gas system might struggle with lighter loads but cycle heavier ones. A new kit helps your shotgun reliably cycle a wider range of 12 gauge ammunition, from light target loads to powerful hunting rounds, giving you greater versatility.
3. Reduced Felt Recoil (Indirectly): While not a direct recoil reduction device, a perfectly sealed and operating gas system optimizes the distribution of recoil forces as the action cycles, contributing to the inherently smooth shooting experience of these Remington models. When the system is worn, the recoil impulse can feel harsher or less controlled.
4. Extended Firearm Lifespan: By ensuring the gas system operates efficiently, you reduce undue stress and wear on other internal components, helping to preserve the overall health and longevity of your shotgun for many more years of enjoyment.
5. Enhanced Shooting Experience: When your shotgun runs flawlessly, you can focus on your target, your technique, and the pure enjoyment of shooting, rather than worrying about malfunctions. This peace of mind is invaluable for hunters, competitive shooters, and recreational users alike.
6. Maintain Resale Value: A well-maintained firearm, especially one with vital internal components refreshed, holds its value better. It signals to potential buyers that the previous owner cared for the firearm diligently.

Who Needs This Kit? Identifying Your Need for a Gas System Refresh

This Remington 12 GA Gas System Kit is an essential purchase for a variety of shotgun owners:

• High-Volume Shooters: If you regularly participate in clay target sports (trap, skeet, sporting clays) or train frequently, your shotgun accumulates a high round count, leading to accelerated wear on gas system components.
• Hunters: Dependability is paramount in the field. Don't let a worn gas system ruin a hunting trip. Proactive replacement ensures your shotgun performs when that opportunity arises.
• Firearm Enthusiasts and Collectors: Maintaining classic firearms like the 1100 and 11-87 in optimal condition is a point of pride. This kit helps keep them running like new.
• DIY Gun Owners & Hobbyists: For those who enjoy performing their own firearm maintenance and repair, this kit provides factory-spec parts for a straightforward replacement.
• Anyone Experiencing Malfunctions: If your 12 gauge Remington 1100 or 11-87 is short stroking, failing to eject, or exhibiting other cycling issues, this kit is often the first and most effective solution.

Signs It's Time for a Replacement: When to Consider a New Gas System

Paying attention to your shotgun's performance can save you from frustrating malfunctions down the line. Here are clear indicators that your Remington's gas system might be due for a refresh:

• Failures to Eject (FTEs): If spent casings are frequently stove-piping, remaining in the chamber, or only partially ejecting, it's a strong sign of insufficient gas pressure.
• Short Stroking: This occurs when the bolt carrier doesn't fully travel to the rear, failing to pick up a new round from the magazine or not locking open on an empty magazine.
• Inconsistent Cycling with Light Loads: Your shotgun might cycle heavy hunting loads fine but struggles or fails completely with lighter target or birdshot loads. This indicates a weakening gas system that can't reliably harness the lower gas pressure of lighter ammunition.
• Visible Wear on Components: During cleaning, inspect your gas piston and sealing rings. Look for pitting, scoring, cracks, or a noticeable loss of elasticity in the O-ring. If the gas rings are brittle or deformed, they are no longer sealing effectively.
• Increased Fouling in the Gas System Area: Excessive gas leakage can lead to more carbon buildup in unintended areas, indicating a poor seal.
• High Round Count: While there's no exact number, if your shotgun has seen thousands of rounds, especially without regular deep cleaning of the gas system, preemptive replacement is a wise move.

A Straightforward Approach: Simple Installation for the DIY Enthusiast

Replacing the gas system components on a Remington 1100 or 11-87 is a relatively straightforward process, even for those with moderate mechanical aptitude. While it's always recommended to consult your shotgun's owner's manual or a reputable gunsmith for detailed instructions, the general steps involve:

1. Ensure Safety: ALWAYS ensure the firearm is unloaded, the chamber is clear, and the safety is engaged before beginning any disassembly.
2. Field Strip: Disassemble the shotgun for cleaning, removing the barrel and fore-end.
3. Access Gas System: The gas piston and O-ring (or seals) are located around the magazine tube, typically beneath the barrel.
4. Remove Old Components: Carefully slide off the old gas piston and any existing sealing rings.
5. Clean Thoroughly: Before installing new parts, thoroughly clean all carbon and residue from the magazine tube, gas ports on the barrel, and the gas cylinder area. This ensures optimal fit and function for the new components.
6. Install New Parts: Lubricate the new O-ring (if applicable) lightly with a recommended firearm lubricant and slide it onto the magazine tube, followed by the new gas piston, ensuring proper orientation.
7. Reassemble: Reassemble the shotgun, ensuring all parts are correctly seated and the action cycles smoothly by hand.

This simple maintenance procedure can dramatically improve your shotgun's performance and give you renewed confidence in its reliability.

Maintaining Your Investment: Maximizing Your Shotgun's Lifespan

Replacing the gas system components is an excellent step, but consistent maintenance is key to long-term performance. After installing your new Remington 12 GA Gas System Kit, make it a habit to:

• Clean Regularly: Thoroughly clean the gas system area after each significant shooting session, paying close attention to the gas ports, gas piston, and inside the action sleeve. Carbon buildup is the enemy of a smooth-running gas system.
• Proper Lubrication: Apply a thin layer of appropriate firearm lubricant to the gas piston and magazine tube, but avoid over-lubrication, which can attract more fouling.
• Inspect Components: During cleaning, take a moment to inspect the new gas seal and piston for any early signs of wear or damage. Proactive detection can prevent future malfunctions.

The Remington Legacy: Trusting Original Equipment

When it comes to maintaining a classic firearm like the Remington 1100 or 11-87, choosing genuine, original equipment manufacturer (OEM) parts is often the wisest decision. Remington parts are designed and manufactured to the exact specifications of your shotgun, ensuring a perfect fit, optimal function, and the same quality and durability as the components originally installed in your firearm. While aftermarket options exist, genuine Remington parts offer peace of mind that you're using components engineered to work seamlessly with your specific model, preserving its integrity and performance characteristics. This is a commitment to the legacy of a brand renowned for its innovation and quality in firearms for generations.

Real-World Applications: Where Reliability Matters Most

The reliability provided by a fully functional gas system is not just a technical specification; it translates directly into performance in various real-world scenarios:

• Waterfowl Hunting: In cold, wet conditions, a shotgun must cycle flawlessly. The dependable operation ensured by a new gas system kit is critical for quick follow-up shots on ducks and geese.
• Upland Bird Hunting: Fast-flushing pheasants or grouse demand quick target acquisition and rapid second or third shots. A reliable 1100 or 11-87 ensures you're ready.
• Sporting Clays and Skeet Shooting: Consistency is key in competitive shooting. Eliminating malfunctions means more broken targets and higher scores, without the frustration of a gun failing during a critical moment.
• Home Defense: In a high-stress situation, your firearm absolutely must perform without hesitation. Ensuring its optimal mechanical condition is a responsible part of readiness.

The Remington 12 GA Gas System Kit for the 1100 and 11-87 (UPC: 047700192581) addresses the fundamental need for reliable shotgun operation. It transforms a potentially problematic firearm back into the smooth, dependable companion you count on, shot after shot.

Frequently Asked Questions About Remington 1100/11-87 Gas Systems

• How often should I replace the gas seal (O-ring) on my Remington 1100/11-87?
  There's no strict round count, but many experienced shooters recommend inspecting the O-ring every 1,000-2,000 rounds or annually, and replacing it at the first sign of wear (cracks, flattening, brittleness) or if you experience cycling issues. The gas piston typically lasts much longer but should be cleaned and inspected regularly.
• Can a worn gas system affect accuracy?
  While it doesn't directly affect the barrel's ability to group shots, an inconsistent gas system can impact your shooting rhythm and confidence, which can indirectly lead to less precise shooting. Its primary impact is on reliable cycling.
• Are the gas systems for the Remington 1100 and 11-87 interchangeable?
  Yes, for the 12 gauge models, the gas system components are generally interchangeable between the Remington 1100 and 11-87 shotguns, which is why this kit fits both.
• What's included in a typical Remington Gas System Kit?
  This specific kit (UPC: 047700192581) typically includes the essential gas piston and gas seal (O-ring/rings) vital for the shotgun's cycling. Always verify specific contents with the product listing.
• Can I install this kit myself, or do I need a gunsmith?
  For most mechanically inclined individuals, replacing these components is a straightforward DIY task. However, if you are uncomfortable with firearm disassembly or encounter difficulties, consulting a qualified gunsmith is always recommended. Always ensure proper safety procedures are followed.

Where to Purchase Your Remington Gas System Kit

Ensure your Remington 1100 or 11-87 is always ready for action. This genuine Remington 12 GA Gas System Kit (SKU: 19258, UPC: 047700192581) is readily available to help you maintain or restore your shotgun's legendary performance. For this and other essential firearm components, trust reputable sources like DEGuns.com, where you can find a wide selection of genuine Remington parts and accessories.

By proactively maintaining your shotgun with quality parts, you ensure that your Remington 1100 or 11-87 continues to be the reliable, smooth-shooting firearm it was designed to be, ready for every hunt, every competition, and every moment at the range.

---

Product Specifications & Compatibility

Feature	Detail
Brand	Remington
Item	Gas System Kit
Gauge	12 GA
Compatibility	Remington 1100, Remington 11-87
SKU	19258
UPC	047700192581

Benefits of a New Gas System Kit

Benefit	Description
Enhanced Reliability	Eliminates cycling issues like short stroking and failures to eject.
Smooth Operation	Restores the signature smooth, low-recoil feel of Remington semi-autos.
Versatile Ammunition	Ensures consistent cycling across a wider range of 12 GA ammunition types.
Extended Lifespan	Reduces wear on other critical components, prolonging firearm life.

Common Issues Addressed

Symptom	Problem Addressed
Short Stroking	Insufficient gas pressure to fully cycle the action.
Failures to Eject	Worn gas seals or piston prevent proper ejection of spent casings.
Inconsistent Cycling	Reliability issues with certain loads, often due to degraded gas system.