Elevate Your Ruger 10/22's Performance with the Warne Maxima A1022S 10 MOA One-Piece Scope Base

Are you a dedicated Ruger 10/22 owner looking to unlock the full potential of your rifle? Do you crave tighter groups at extended ranges, more precise optic adjustments, and an unshakable foundation for your rifle scope? If so, the Warne Maxima A1022S Ruger 10/22 1-Piece Base with a 10 MOA cant is the essential upgrade you've been searching for. This isn't just a scope mount; it's a precision engineering marvel designed to transform your beloved rimfire into a formidable long-range plinking machine or a highly accurate small-game hunting rifle.

Why Your Ruger 10/22 Needs a Precision Scope Base

The Ruger 10/22 is renowned for its reliability, versatility, and affordability. However, to truly maximize its accuracy, especially when venturing beyond typical rimfire distances, a high-quality scope base is non-negotiable. Standard mounting solutions can introduce flex, misalignment, or insufficient elevation adjustment for longer shots. The Warne Maxima A1022S directly addresses these challenges, providing a robust and perfectly aligned platform for your chosen optic.

Common questions this product helps answer:

• "How can I improve my Ruger 10/22's accuracy at longer distances?"
• "What's the best scope mount for a Ruger 10/22 for precision shooting?"
• "Why do competitive rimfire shooters use angled scope bases?"
• "How do I ensure my scope is mounted securely and accurately on my 10/22?"
• "What does 10 MOA cant mean for my rifle scope?"

Unveiling the Maxima A1022S Advantage: Engineered for Excellence

The Warne Maxima A1022S isn't just another accessory; it's a critical component crafted to enhance your shooting experience. Let's delve into the features that set this 1-piece base apart:

The Power of a 10 MOA Cant: Extending Your Effective Range

One of the most significant advantages of the Maxima A1022S is its integrated 10 MOA (Minute of Angle) cant. But what exactly does that mean for you and your shooting?

• Compensating for Bullet Drop: Even with a fast-flying .22LR, gravity takes its toll. Beyond 50 or 75 yards, bullet drop becomes a significant factor. A standard scope base mounts your optic perfectly parallel to the bore. This means a good portion of your scope's internal elevation adjustment might be "used up" just to zero at typical rimfire distances. The 10 MOA cant slightly tilts the scope downward relative to the bore. This effectively pre-loads your scope's elevation adjustment, allowing you to use more of its upward travel for dialing in shots at 100, 150, or even 200 yards.
• Maximizing Scope Performance: By utilizing the mechanical center of your scope's elevation turret more effectively, you often achieve clearer optics and more consistent clicks throughout its adjustment range. This can lead to greater precision and repeatability in your shots.
• Essential for Long-Range Rimfire: For shooters participating in rimfire silhouette, NRL22, or simply enjoying extended-range plinking, a canted base like the Maxima A1022S is an absolute necessity. It allows your scope to "reach out" further without running out of elevation adjustment.

One-Piece Construction: Unparalleled Rigidity and Alignment

Unlike two-piece bases that mount independently to the receiver, the Warne Maxima A1022S is a single, continuous piece of precision-machined aluminum. This design offers several critical benefits:

• Superior Rigidity: A one-piece base significantly increases the overall stiffness of your mounting system. This rigidity minimizes any potential flex or movement that could compromise accuracy, especially under repeated firing.
• Enhanced Alignment: By spanning the entire receiver, the one-piece design ensures perfect alignment between both mounting points, eliminating the potential for scope strain or misalignment that can occur with two-piece bases if not installed perfectly. This reduces stress on your scope's internal components, potentially extending its lifespan.
• Rock-Solid Zero Retention: When your scope base is as solid as your receiver, your zero becomes incredibly reliable. This means less time re-zeroing and more time confidently putting rounds on target.
• Streamlined Profile: The integrated design offers a clean, low-profile look that complements the sleek lines of the Ruger 10/22.

Premium Materials and Precision Manufacturing

Warne Scope Mounts are renowned for their commitment to quality, and the Maxima A1022S is no exception. This base is precision CNC machined from high-strength, aircraft-grade aluminum. This material choice ensures a lightweight yet incredibly durable platform that can withstand the rigors of extensive use without adding unnecessary bulk to your rifle. The meticulous manufacturing process guarantees precise dimensions, ensuring a perfect fit and optimal performance on your Ruger 10/22 receiver.

Universal Compatibility with Picatinny/Weaver Rings

The Maxima A1022S features a MIL-STD 1913 Picatinny rail design, making it universally compatible with any Picatinny or Weaver-style scope rings. This versatility allows you to choose from a vast array of high-quality rings from Warne or other reputable manufacturers, giving you the freedom to customize your optic setup to your exact needs. Whether you prefer quick-detach (QD) rings for easy scope swapping or robust fixed rings for maximum stability, this base accommodates them all.

Real-World Applications: Where the Maxima A1022S Shines

The Warne Maxima A1022S is an indispensable upgrade for a variety of Ruger 10/22 applications:

• Precision Target Shooting & Plinking: For shooters who enjoy punching paper or hitting reactive targets at varied distances, the 10 MOA cant helps you make those challenging long shots more attainable and consistent. Experience the satisfaction of tighter groups and more confident engagements at 100+ yards.
• Small Game Hunting: When hunting squirrels, rabbits, or other small varmints, shot placement is paramount. A stable and accurately mounted optic, bolstered by the Maxima A1022S, ensures precise aim, increasing your chances of a clean, ethical take.
• Rimfire Competition (e.g., NRL22, PRS Rimfire): In the competitive shooting world, every advantage counts. The 10 MOA cant is a standard requirement for many long-range rimfire competitions, allowing competitors to engage targets out to 200-300 yards or more without running out of scope elevation. The Maxima A1022S provides the robust foundation needed for repeatable performance under pressure.
• General Purpose Shooting: Even for casual shooters, the improved stability and alignment offered by a one-piece Warne Maxima base will enhance the overall shooting experience, making your Ruger 10/22 feel more precise and reliable.

Installation: A Step-by-Step Guide for Optimal Performance

Proper installation is crucial to fully realize the benefits of your Warne Maxima A1022S base. While the process is straightforward, attention to detail is key.

Before You Begin:

• Safety First: Ensure your firearm is unloaded and pointed in a safe direction. Always follow proper firearm safety procedures.
• Gather Your Tools: You will need the Warne Maxima A1022S base, the supplied Torx 15 screws, and a T-15 wrench (a common tool for scope mounting, often found with WARNE rings or available separately). WARNE also recommends a REMOVABLE thread-locking compound (e.g., blue Loctite) for best results, which should be acquired separately.
• Inspect Your Firearm: Visually inspect your Ruger 10/22 receiver for any burrs around the screw holes. If present, gently remove them to ensure the base sits perfectly flush.
• Clean Contact Surfaces: Thoroughly remove all oil, grease, and debris from the screw holes in the receiver, the supplied base screws, and the contact surfaces where the base will meet the receiver. A degreaser or rubbing alcohol can be used, followed by a dry cloth. This step is critical for ensuring proper torque and adhesion of thread-locking compound.

Installation Steps:

• Position the Base: Carefully place the Warne Maxima A1022S scope mount base onto the receiver of your Ruger 10/22.
• Check Fit and Alignment: Ensure the base sits flush and the screw holes align perfectly. There should be no gaps or rocking.
• Insert Screws (Hand Tighten): Insert the supplied Torx 15 screws into the screw holes. Using your T-15 wrench, loosely install the screws. Do not tighten them fully at this stage. The goal is just to hold the base in place.
• Apply Thread-Locking Compound (Recommended): If using a removable thread-locking compound as recommended by WARNE, apply a small drop to the threads of each screw before the final tightening step. This helps prevent screws from loosening under recoil.
• Final Tightening: Once the base is properly positioned and all screws are loosely installed (and thread locker applied if desired), firmly tighten the screws.
  • CRITICAL TORQUE SPECIFICATION: Do NOT exceed 15 inch-pounds (in/lb) of torque. Using a torque wrench is highly recommended for this step to ensure optimal clamping force without overtightening, which could damage the receiver threads or the base itself. The original instructions explicitly state: Do not use TW1 Torque Wrench, Do not exceed 15in/lb torque. This emphasis on not exceeding 15in/lb is paramount for the longevity of your setup.
• Verify Stability: After tightening, gently attempt to move the base by hand to ensure it is rock-solid and does not wiggle or shift.

Following these steps meticulously will ensure your Warne Maxima A1022S base provides the stable, precise foundation your optic deserves.

Maintenance and Care for Your Scope Base

While the Warne Maxima A1022S is built for durability, a little care goes a long way in ensuring its long-term performance:

• Periodic Checks: Periodically check the tightness of your base screws, especially after extensive shooting sessions. While thread locker helps, environmental factors and repeated recoil can sometimes cause slight loosening over time.
• Cleaning: Use a soft cloth to wipe down the base after use. If it becomes excessively dirty, a mild solvent specifically designed for firearms can be used, ensuring it doesn't leave residue that could affect your optic's mounting.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or strong solvents that could damage the finish or material of the base.

Why Choose Warne Scope Mounts?

Warne Scope Mounts has established itself as a leader in the firearms accessory industry by consistently delivering products that embody precision, strength, and reliability. Their Maxima series, including the A1022S, is a testament to their commitment to quality. When you choose Warne, you're investing in:

• American Craftsmanship: Many Warne products are proudly made in the USA, ensuring high manufacturing standards and stringent quality control.
• Innovative Design: Warne continuously innovates to meet the evolving needs of shooters, offering solutions like integrated cant for long-range applications.
• Trusted by Professionals and Enthusiasts: From competitive shooters to hunters and tactical operators, Warne mounts are a trusted choice for securely attaching optics.

Ready to Upgrade Your Ruger 10/22?

The Warne Maxima A1022S Ruger 10/22 1-Piece Base with 10 MOA cant is more than just an accessory; it's an investment in your shooting precision and overall enjoyment. By providing a stable, perfectly aligned, and range-extending platform for your optic, it empowers your Ruger 10/22 to perform at its peak. Whether you're a seasoned long-range enthusiast or just starting to explore the capabilities of your rimfire rifle, this scope base is the foundational component you need for consistent accuracy and superior performance. Discover this essential upgrade and all your firearm needs at DEGuns, where quality meets reliability.

Feature	Description
Model	Warne Maxima A1022S Ruger 10/22 1-Piece Base
Compatibility	Specifically designed for the Ruger 10/22 Rifle. Compatible with all Picatinny and Weaver-style scope rings.
Cant	10 MOA (Minute of Angle)
Design	One-Piece Construction for enhanced rigidity, stability, and alignment. Reduces stress on the receiver and maintains zero reliably.
Material	Precision CNC machined from high-strength, lightweight Aircraft-Grade Aluminum for durability without adding excess weight.
Finish	Typically a matte black, durable finish that resists corrosion and blends seamlessly with most firearms.
Installation	Securely mounts with Torx 15 screws (supplied). Requires T-15 wrench. Maximum torque: 15 in/lb. Removable thread-locking compound recommended.
Benefits	Extends effective range for long-range shooting, maximizes scope's elevation adjustment, improves accuracy, enhances zero retention, and provides a rock-solid platform for optics. Ideal for competition, hunting, and precision plinking.
UPC	656813104581
SKU	A1022S
Manufacturer	Warne Scope Mounts