Elevate Your Remington 700 Performance with the Seekins Precision 20 MOA Scope Base

For serious precision shooters, long-range hunters, and tactical enthusiasts, the foundation of an accurate rifle system often starts not with the rifle itself, but with the often-overlooked components that bridge the gap between your firearm and your optic. The Seekins Precision MOA Scope Base (MPN: 10710021) represents a critical upgrade for any Remington 700 owner aiming to push the boundaries of their rifle's performance. This isn't just another accessory; it's an engineering solution designed to maximize your scope's capabilities, enhance shot consistency, and provide unwavering stability under the most demanding conditions.

Are you looking to take your Remington 700 to the next level of long-range accuracy? Do you frequently find yourself running out of vertical adjustment on your scope when shooting at extended distances? The Seekins Precision 20 MOA Scope Base is specifically engineered to address these challenges, offering a robust and precise mounting platform that is absolutely essential for achieving ethical hits at extreme ranges or dominating the competition in precision rifle matches.

Unlocking Long-Range Potential: Why 20 MOA is Crucial

One of the most common questions precision shooters ask is, "Why do I need a MOA scope base?" And more specifically, "What are the benefits of a 20 MOA scope base for long-range shooting?"

MOA, or Minute of Angle, is a unit of angular measurement used in shooting to describe the size of groups, adjustments on optics, and bullet drop. A 20 MOA scope base is designed with a slight forward tilt, meaning the rear of the base is effectively 20 MOA higher than the front. This tilt angles your scope slightly downwards towards the barrel. While this might seem counterintuitive at first glance, its purpose is brilliantly simple: it preserves your scope's internal elevation adjustment.

• Expanded Elevation Adjustment: When shooting at very long distances (e.g., 600 yards, 800 yards, 1000 yards, or more), your bullet will experience significant drop due to gravity. To compensate for this, you dial up your scope's elevation turret. Without a canted base, a significant portion of your scope's internal elevation adjustment range is used simply to zero the rifle at closer distances (e.g., 100 or 200 yards). This leaves limited "up" travel for extreme long-range shots. A 20 MOA base pre-compensates for some of that initial bullet drop, allowing you to zero your rifle closer to the center of your scope's adjustment range. This frees up crucial elevation clicks, giving you significantly more usable "up" travel for dialing in those distant targets.
• Optical Clarity at Range: By keeping your scope's erector system closer to its optical center, a 20 MOA base can also contribute to better optical clarity and reduced image distortion at higher magnification settings, as the lenses are operating within their most efficient range.
• Mitigating Mechanical Stress: It also reduces the mechanical strain on your scope's internal components, as the erector system doesn't have to be pushed to its extreme limits to compensate for ballistic drop. This can extend the life of your expensive optics.

So, if your shooting activities frequently involve engaging targets beyond 300-400 yards, a 20 MOA base is not just an option, it's a necessity for optimizing your rifle's trajectory compensation and ensuring you have enough elevation to reach your target.

Engineered for Excellence: Key Features of the Seekins Precision MOA Scope Base

The reputation of Seekins Precision in the firearms industry is built on a foundation of meticulous engineering, robust materials, and uncompromising quality control. The Seekins Precision 0010710021 MOA Scope Base embodies these principles, offering features that directly translate into tangible performance benefits for the end-user.

1. Integrated Recoil Lug: This is a hallmark feature of superior scope base design and a critical differentiator for the Seekins Precision base. Unlike many conventional bases that rely solely on the mounting screws to absorb recoil forces, the integrated recoil lug is precisely milled directly into the scope base itself.
   • What it does: This lug interfaces with a corresponding slot or recess on the rifle's receiver. When the rifle fires, the recoil forces are directly transferred into the receiver via this robust lug, bypassing the mounting screws almost entirely.
   • Benefits:
     • Eliminates Scope Shift: By providing a positive, non-slip anchor point, the integrated recoil lug prevents the scope base from creeping or shifting under repeated recoil, even from powerful magnum cartridges. This ensures your zero remains rock-solid, shot after shot.
     • Reduces Stress on Mounting Screws: Since the recoil energy is absorbed by the lug, the mounting screws are under significantly less shear stress. This prevents screw loosening, breakage, and premature wear, enhancing the overall durability and reliability of your mounting system.
     • Maintains Precision: A stable scope base is paramount for repeatable accuracy. The integrated lug guarantees that your scope's position relative to the bore remains consistent, leading to tighter groups and more predictable shot placement.
2. Premium Material: 7075-T6 Aluminum: The choice of material is fundamental to the durability and lightweight nature of a high-performance scope base. Seekins Precision utilizes 7075-T6 aluminum, an aerospace-grade alloy known for its exceptional strength-to-weight ratio and fatigue resistance.
   • Strength: 7075-T6 offers superior strength compared to other common aluminum alloys, making it ideal for components subjected to high stress, like a scope base on a powerful rifle.
   • Lightweight: Despite its strength, aluminum keeps the overall weight of your rifle system down, a critical consideration for both competitive shooters and hunters who carry their rifles over long distances.
   • Corrosion Resistance: The material, combined with the Black Anodized finish, provides excellent resistance to corrosion, ensuring the base stands up to harsh environmental conditions encountered in the field.
3. Robust Mounting Hardware: #8-40 Fasteners: The strength of your scope base is only as good as its weakest link, and often that's the mounting hardware. The Seekins Precision base includes #8-40 fasteners.
   • Why #8-40? Many standard Remington 700 actions come drilled and tapped for #6-48 screws. However, for custom actions, upgraded rifles, or those seeking maximum mounting security, #8-40 screws offer significantly increased thread engagement and shear strength. This larger screw size provides a more robust attachment to the receiver, further enhancing the base's stability and resistance to recoil forces. It's an excellent choice for those building or upgrading a precision rifle where every detail counts.
4. Picatinny Style Interface: The Picatinny rail (MIL-STD-1913) is the industry standard for mounting optics and accessories, and the Seekins Precision base conforms perfectly to this standard.
   • Universal Compatibility: This ensures maximum compatibility with a wide range of scope rings, including those from Seekins Precision themselves, as well as virtually every other reputable manufacturer on the market.
   • Flexible Ring Placement: The multiple slots along the Picatinny rail allow for precise and flexible positioning of your scope rings, ensuring optimal eye relief and accommodating various scope lengths and ring configurations.

Seamless Integration: Designed for Remington 700 Rifles

The Seekins Precision MOA Scope Base is specifically designed for the Remington 700 Short Action. The Remington 700 is one of the most popular and widely customized bolt-action rifle platforms in the world, known for its inherent accuracy and vast aftermarket support.

• Perfect Fit: This base ensures a precise, custom-fit interface with the Remington 700 Short Action receiver, guaranteeing proper alignment and maximum surface contact for superior stability.
• Enhances Inherent Accuracy: By providing a perfectly aligned and rock-solid mounting platform, the Seekins Precision base allows your Remington 700 to achieve its full accuracy potential. It eliminates variables associated with scope mounting, ensuring that any inaccuracies come from the shooter or ammunition, not the equipment.
• Upgrade for Any R700 Build: Whether you're upgrading an existing factory Remington 700, building a custom precision rifle from a stripped action, or enhancing a tactical variant, this scope base is an indispensable component for optimizing your firearm's overall performance.

Real-World Scenarios: Who Benefits from This Upgrade?

The benefits of the Seekins Precision 20 MOA Scope Base extend across a wide spectrum of shooting disciplines and applications.

• Competitive Shooters (PRS, NRL, F-Class): In precision rifle series (PRS), National Rifle League (NRL), and F-Class competitions, every MOA of elevation adjustment and every ounce of accuracy matters. This base provides the crucial elevation needed for long-range stages and ensures that zero holds true under rapid-fire and intense match conditions. Its durability means less time worrying about equipment failure and more time focusing on the shot.
• Long-Range Hunters: For hunters pursuing game at extended distances, an ethical, clean kill is paramount. Having the ability to dial in precise elevation adjustments without "bottoming out" your scope ensures you can confidently engage targets at ranges where trajectory compensation is critical. The robust nature of the integrated recoil lug also provides peace of mind when venturing into rugged terrain.
• Precision Rifle Builders & Customizers: Those undertaking a custom Remington 700 build understand that the smallest details contribute to the overall performance. Selecting a premium scope base like this one is a foundational decision that impacts the entire optics system. The #8-40 fastener compatibility is particularly appealing for custom actions often drilled for these larger, stronger screws.
• Casual Enthusiasts Seeking Improvement: Even if you're not a competitive shooter, but simply want to improve your long-range capabilities or ensure your expensive optic is mounted as securely as possible, this Seekins Precision base is a worthwhile investment. It simplifies long-range shooting by providing the necessary elevation range and reduces frustration caused by unreliable mounts.

Installation & Maintenance: Maximizing Your Investment

Proper installation of any scope base is critical to achieving maximum accuracy and reliability. While the Seekins Precision MOA Scope Base is designed for straightforward mounting, a few considerations can ensure optimal performance.

1. Cleanliness is Key: Before mounting, thoroughly clean the receiver's screw holes and the base's mating surface to remove any oil, grease, or debris. This ensures proper thread engagement and a secure metal-to-metal fit.
2. Torque Specifications: Always follow the manufacturer's recommended torque specifications for the mounting screws. Over-tightening can strip threads or distort the base, while under-tightening can lead to movement under recoil. Using a quality torque wrench is highly recommended.
3. Thread Locker (Optional but Recommended): A small amount of non-permanent (e.g., blue) thread locker can be applied to the screws to further prevent loosening from recoil and vibrations. Ensure it's compatible with your rifle's finish and material.
4. Leveling: Once the base is installed, ensure it is perfectly level before mounting your scope rings and optic. Precision levels designed for rifle work are invaluable here.

Maintaining your scope base involves periodic checks of the mounting screws for tightness and cleaning to prevent the buildup of dirt or corrosive residues, especially after exposure to harsh weather conditions. The black anodized finish on the 7075-T6 aluminum provides excellent protection, requiring minimal specific care beyond general firearm maintenance.

Frequently Asked Questions About Rifle Scope Bases

Here are some common questions users have when considering a new scope base for their precision rifle:

• Q: What is the best scope base for a Remington 700?
  • A: For precision long-range shooting, a high-quality Picatinny-style scope base with an integrated recoil lug and appropriate MOA cant (like the 20 MOA offered by Seekins Precision) is widely considered among the best. Brands like Seekins Precision are renowned for their robust construction and engineering excellence, providing a stable and reliable platform that maximizes the performance of your optic on a Remington 700 platform.
• Q: How does a 20 MOA base improve long-range accuracy?
  • A: A 20 MOA base helps by preserving your scope's internal elevation adjustment range. It pre-compensates for some of the bullet's natural drop, allowing you to zero your scope closer to the optical center. This "frees up" more clicks for dialing in extreme long-range targets, preventing you from running out of elevation and ensuring your scope operates efficiently within its optimal range.
• Q: Why is an integrated recoil lug important?
  • A: An integrated recoil lug is crucial because it provides a positive anchor point that absorbs the recoil forces directly into the rifle's receiver. This significantly reduces stress on the mounting screws, prevents the scope base from shifting under recoil, and ensures your zero remains consistent, even with high-power cartridges. It's a key feature for maintaining repeatable accuracy and extending the life of your mounting system.
• Q: Can I install this scope base myself, or do I need a gunsmith?
  • A: If you have the proper tools (torque wrench, bit set, cleaning supplies, and potentially a thread locker) and a basic understanding of mechanical work, installing a scope base can be a straightforward DIY task. However, precision rifle work often benefits from professional gunsmithing, especially if you're uncomfortable with torque settings, leveling, or want absolute assurance of perfect alignment. For optimal performance, always ensure correct torque and alignment.
• Q: What are the benefits of 7075-T6 aluminum for a scope base?
  • A: 7075-T6 aluminum is an aerospace-grade alloy known for its exceptional strength and light weight. For a scope base, this means it can withstand the significant forces of recoil without deforming, while adding minimal bulk to your rifle. It also offers excellent corrosion resistance, especially when combined with a durable anodized finish, ensuring longevity in various environments.

The Seekins Precision Advantage: A Legacy of Quality

Seekins Precision has established itself as a leader in the firearms industry by consistently delivering high-performance components engineered to exacting standards. Their commitment to innovation and quality is evident in every product, from complete rifles to essential accessories like this MOA Scope Base. When you choose a Seekins Precision product, you're investing in reliability, precision, and the confidence that your equipment will perform when it matters most. This dedication to excellence ensures that their products are not just functional, but genuinely enhance the shooting experience for enthusiasts and professionals alike. The Seekins Precision MOA Scope Base (MPN: 10710021, UPC: 811452025295) is a testament to this enduring legacy.

Invest in the foundation of your precision rifle system. By upgrading to the Seekins Precision 20 MOA Scope Base, you're not just adding a part; you're unlocking your Remington 700's true long-range potential and ensuring unwavering accuracy for every shot.

Feature	Detail
Brand	Seekins Precision
Model	MOA Scope Base
Firearm Fit	Remington 700 Short Action
Color	Black Anodized
Material	7075-T6 Aluminum
MOA	20
Mount Type	To Receiver (Picatinny Style)
Fasteners	#8-40
Recoil Lug	Integrated
Rings Included	No
Pieces	1
SKU / MPN	10710021
UPC	811452025295