Elevate Your Shotgun's Performance: The Carlson's 7-Round Magazine Extension for Remington Shotguns

For shotgun owners seeking to significantly enhance their firearm's capacity, versatility, and overall effectiveness, the Carlson's 7-Round Shotgun Magazine Extension stands out as an essential upgrade. This expertly crafted accessory is specifically designed for popular Remington shotgun models, including the Remington 870, 1100, and 11-87. It addresses a fundamental need for increased ammunition on hand, transforming your shotgun from a standard-capacity firearm into a formidable tool suitable for a wide array of applications, from home defense and competitive shooting to certain hunting scenarios and general recreational use.

Why More Capacity Matters: Solving Common Shotgun Challenges

The standard capacity of many shotguns can be a limiting factor in high-stress situations or during extended shooting sessions. Whether you're a homeowner preparing for a worst-case scenario, a competitive shooter striving for faster stage times, or a dedicated enthusiast who values uninterrupted range time, the need for additional rounds is universally understood.

• For Home Defense: In a critical home defense situation, every round counts. The ability to have more ammunition readily available without the need for an immediate reload can be the decisive factor in protecting your home and family. An extended magazine ensures you're prepared for multiple threats or prolonged engagements, providing a crucial margin of safety and confidence.
• For Competitive Shooting (3-Gun, IPSC, etc.): Competitive shotgun sports often demand high round counts and rapid target engagement. A larger magazine capacity directly translates to fewer reloads during a stage, saving precious seconds that can mean the difference between winning and losing. Competitors frequently seek reliable ways to maximize their shotgun's capabilities, and a magazine extension is a primary modification for this purpose.
• For Certain Hunting Applications: While many hunting scenarios don't require high capacity, some niche applications, such as varmint control or pest management where multiple targets may be present, can benefit from an extended magazine (always check local regulations regarding magazine capacity for hunting).
• For Recreational Shooting and Training: At the range, a higher capacity means more time shooting and less time reloading. This not only enhances the enjoyment of your session but also allows for more fluid and realistic training drills, preparing you for real-world scenarios without constant interruption.

The Carlson's 7-Round Magazine Extension directly solves these challenges by adding a substantial seven rounds to your shotgun's existing capacity. This means a significantly increased round count, providing a distinct advantage in any situation where sustained firepower is beneficial.

Unpacking the Features: Precision Engineering for Peak Performance

Carlson's is renowned for its commitment to quality and precision in firearm accessories, and this magazine extension is a testament to that legacy. Every aspect of its design and construction is geared towards durability, reliability, and seamless integration with your Remington shotgun.

Robust Steel Construction and Blued Finish

• Material Excellence: The extension is crafted from high-quality steel, a material chosen for its inherent strength and resistance to impact. This ensures the extension can withstand the rigors of heavy use, harsh environments, and the powerful recoil generated by shotgun shells without compromising structural integrity.
• Durable Blued Finish: The entire unit is treated with a classic blued finish. This traditional surface treatment not only provides an aesthetically pleasing, non-reflective appearance that seamlessly matches most factory shotgun finishes but, more importantly, offers exceptional corrosion resistance. This protective layer guards against rust and oxidation, ensuring the extension remains functional and pristine even after exposure to moisture, sweat, or demanding outdoor conditions. This commitment to finish quality means your investment will retain its performance and appearance for years to come.

Enhanced Capacity: A True 7-Round Boost

• Significant Ammunition Increase: The primary function of this extension is to expand your shotgun's magazine capacity by a full seven rounds. For a typical Remington 870 with a standard 4-round capacity, this instantly boosts your total onboard ammunition to a formidable 11 rounds (4+7). This substantial increase dramatically reduces the frequency of reloads, providing a critical advantage in dynamic shooting environments.
• Reliable Feeding: Engineered to maintain the smooth and consistent feeding of shells into the chamber, the extension includes a new spring and a high-visibility follower. The spring is designed to provide optimal tension throughout the full length of the extended magazine, preventing feeding issues and ensuring reliable operation under all conditions. The bright, anti-tilt follower helps indicate an empty magazine and ensures smooth, consistent movement of shells.

Seamless Compatibility: Tailored for Remington's Finest

• Designed for Popular Models: This particular extension (Carlsons 04506) is precision-engineered to integrate perfectly with the most popular Remington pump-action and semi-automatic shotguns: the Remington 870, Remington 1100, and Remington 11-87. This specific compatibility ensures a snug fit, reliable operation, and maintains the firearm's balance and aesthetics as much as possible with the added length.
• Factory-Level Fit and Finish: When installed, the Carlson's extension aligns perfectly with the shotgun's existing magazine tube, creating a cohesive look and feel that appears almost factory-original. This attention to detail reflects Carlson's commitment to providing products that not only perform exceptionally but also integrate flawlessly.

Ease of Installation: Upgrade Your Shotgun with Confidence

One of the most appealing aspects of the Carlson's 7-Round Magazine Extension is its straightforward installation process. While consulting your shotgun's manual and potentially seeking professional assistance for any firearm modification is always recommended, the design of this extension allows many users to perform the upgrade themselves with basic tools and a little patience.

General Installation Steps (Always refer to specific instructions included with the product and your shotgun's manual):

1. Ensure Safety: Always begin by verifying that your shotgun is completely unloaded. Double-check the chamber and magazine tube. Remove the bolt if possible or lock it open to confirm no ammunition is present.
2. Remove Factory Cap/Tube: Most Remington shotguns will have a factory magazine cap or a retaining pin that holds the existing magazine spring and follower in place. Carefully remove this, often by unscrewing the cap or tapping out a cross-pin. Be mindful of the spring tension when removing the cap.
3. Insert New Components: The Carlson's extension typically comes with a new, longer spring and a new follower. Carefully insert the new follower into the shotgun's existing magazine tube, followed by the new spring.
4. Attach Extension: Thread the Carlson's magazine extension onto the existing magazine tube of your shotgun. Ensure it's tightened securely, but do not overtighten, this can damage threads. Some extensions may include a barrel clamp to further secure the extension to the barrel, which is highly recommended for stability and protection against potential bending.
5. Function Check: Once installed, perform a thorough function check. Manually cycle the action several times with snap caps (dummy rounds) or empty shells to ensure smooth feeding and ejection. Test the magazine's capacity by loading the appropriate number of rounds to confirm it functions as expected.

For those less comfortable with DIY firearm modifications, or if you encounter any issues, taking your shotgun to a qualified gunsmith is always a wise decision. They can ensure the extension is installed correctly and safely.

Real-World Performance and Trust

Carlson's has built a reputation for producing high-quality, reliable firearm accessories. The 7-round magazine extension is a prime example of their dedication to performance. Users consistently report:

• Flawless Cycling: The included spring and follower are specifically designed to work in harmony with the extension, promoting consistent and reliable feeding of various shotshell types.
• Durable Build: The steel construction and blued finish stand up to harsh conditions, resisting scratches, dings, and corrosion even with extensive field use or competitive training.
• Enhanced Control: While adding length, the extension often maintains the shotgun's balance surprisingly well, especially when paired with a barrel clamp, preventing excessive muzzle-heaviness and maintaining maneuverability.
• Competitive Edge: For 3-Gun and other action shooting sports, this extension is a must-have, directly contributing to lower stage times and higher scores by minimizing reloads.
• Confidence in Crisis: For home defense, the added capacity offers invaluable peace of mind, knowing you have more rounds ready to address a threat without the immediate need to reload under pressure.

Investing in Your Shotgun's Future

Upgrading your Remington 870, 1100, or 11-87 with the Carlson's 7-Round Magazine Extension is more than just adding capacity; it's an investment in your shotgun's capability and your overall shooting experience. It transforms a capable firearm into a truly optimized system, ready to perform at its peak in any demanding situation. The enhanced capacity provides tactical flexibility, a competitive advantage, and a greater sense of security.

When considering such an upgrade, it's important to be aware of local and state laws regarding magazine capacity, especially for hunting or certain types of firearms. Always ensure your setup complies with all applicable regulations.

For shotgun owners who demand reliability, durability, and a significant boost in ammunition capacity, the Carlson's 7-Round Steel Blued Finish Magazine Extension for Remington shotguns is an unparalleled choice. This high-quality accessory is designed to last, perform flawlessly, and seamlessly integrate with your existing firearm, providing a tangible improvement in its overall utility and effectiveness. Elevate your Remington shotgun's potential today.

All Carlson's products, including this magazine extension, are available at DEGuns and deguns.com, where you can find a wide selection of firearm accessories and expert advice.

Product Specifications

Feature	Detail
Product Type	Shotgun Magazine Extension
Capacity Added	7 Rounds
Material	Steel
Finish	Blued
Compatibility	Remington 870, Remington 1100, Remington 11-87 (12 Gauge models)
UPC	785367045066
Manufacturer SKU	04506
Included	Magazine tube, spring, high-visibility follower, barrel clamp
Application	Home Defense, Competitive Shooting, Recreational Use, Tactical Upgrades