Elevate Your Reloading Process: The Essential Guide to RCBS Case Slick Spray Lube

For reloaders committed to precision, efficiency, and the longevity of their equipment, the often-overlooked step of case lubrication is paramount. Whether you're a seasoned handloader or just beginning your journey into crafting custom ammunition, understanding the critical role of a superior case lubricant can transform your experience. Stuck cases, damaged dies, and inconsistent resizing are common frustrations that can be easily avoided with the right product. This comprehensive guide delves into the world of metallic cartridge lubrication, focusing on a trusted solution that has empowered countless reloaders: the RCBS Case Slick Spray Lube 4 oz (Product No. 9315).

Why Case Lubrication is Non-Negotiable for Reloading Success

The act of resizing fired brass cases back to their original dimensions is fundamental to the reloading process. When a metallic cartridge case is fired, it expands to conform to the chamber of the firearm. To reuse this brass, it must be "sized" down to fit once more into a die and then into a firearm chamber. This process involves significant friction between the brass case and the steel sizing die. Without proper lubrication, several critical problems can arise:

• Stuck Cases: This is perhaps the most common and frustrating issue for reloaders. If a case is not adequately lubricated, the friction can become so immense that the case literally seizes inside the sizing die, often requiring specialized tools or even disassembling the die to extract it. This halts your reloading session, wastes valuable time, and can potentially damage your die.
• Excessive Force Required: Even if a case doesn't get completely stuck, insufficient lubrication demands excessive force from your reloading press lever. This not only makes the process more arduous but also puts undue strain on your press linkages, potentially leading to premature wear or even breakage over time.
• Case Damage: Without lubrication, the immense friction can scratch, score, or even tear the brass case, rendering it unusable. This reduces the lifespan of your valuable brass, increasing your long-term reloading costs.
• Die Damage: The abrasive friction between dry brass and the steel interior of your sizing die can lead to wear, galling, or scoring of the die itself. A damaged die can produce inconsistently sized cases, affecting accuracy, or may need expensive replacement.
• Inconsistent Resizing: Proper lubrication ensures a smooth, uniform resizing operation. This consistency is crucial for achieving precise case dimensions, which directly impacts bullet seating tension, powder charge consistency, and ultimately, firearm accuracy.

For those asking, "What's the best way to prevent stuck cases when reloading?" or "How can I make my case sizing smoother?", the answer unequivocally lies in using a high-quality case lubricant like RCBS Case Slick Spray Lube.

Introducing RCBS Case Slick Spray Lube 4 oz (Product No. 9315)

The RCBS Case Slick Spray Lube in its convenient 4-ounce aerosol can is engineered specifically to address these challenges, offering a highly effective and user-friendly solution for metallic cartridge reloading. RCBS, a name synonymous with reloading excellence, has developed this spray lube to provide unparalleled lubricity, making the sizing process effortless and reliable.

Key Features and Benefits that Set It Apart:

• Superior Lubricity: The advanced formula drastically reduces friction between the brass case and the sizing die, allowing for smooth, consistent sizing with minimal effort. This is particularly beneficial for full-length sizing rifle cases, which typically require more force.
• Convenient Aerosol Application: Unlike traditional pad-applied or paste lubes, the spray format ensures quick, even, and consistent coverage across multiple cases at once. This significantly speeds up the case preparation phase, allowing you to get to the actual loading faster.
• Non-Toxic and Safe: Formulated to be non-toxic, it's safer for the user and the environment compared to some older chemical-based lubricants. Always use in a well-ventilated area as with any aerosol product.
• Will Not Contaminate Powder or Primers: A critical concern for reloaders is avoiding any substance that could interfere with the combustion of powder or the ignition of primers. RCBS Case Slick Spray Lube is designed to be harmless in this regard, ensuring the integrity of your ammunition.
• Easy Cleanup: The lubricant is easily removed from cases after the sizing process, typically with a quick tumble in a media tumbler or a simple wipe-down, leaving your cases clean and ready for the next steps in your reloading sequence.
• Economical 4 oz Can: The 4-ounce volume provides ample lubricant for thousands of cases, making it a cost-effective choice for both casual and high-volume reloaders. A little goes a long way with this efficient spray.

When considering "What is the easiest case lube to use?", many experienced reloaders will point to spray-on solutions, and the RCBS Case Slick Spray Lube stands out as a prime example due to its consistent performance and ease of application.

The Power of Spray Lube: Efficiency and Effectiveness

Why choose a spray lubricant over traditional methods? Reloaders often ask, "Is spray lube good for reloading?" The answer is a resounding yes, especially for those seeking efficiency without compromising quality.

• Time-Saving: With a spray lube, you can quickly lubricate a batch of cases laid out on a loading block or tray. A few passes of the aerosol mist are often enough to prepare dozens of cases for sizing simultaneously. This eliminates the individual rolling or coating required by pad or paste lubricants.
• Uniform Coverage: The fine mist from the aerosol can helps ensure an even coating across the entire surface of the case, including the case body and neck. This uniform application is crucial for preventing galling and ensuring smooth sizing from top to bottom.
• Minimal Residue: Designed to be thin yet effective, this lubricant leaves behind minimal residue on your cases and dies. This means less mess and easier cleanup after the sizing operation, preserving the cleanliness of your reloading area and tools.
• Ideal for Progressive Presses: For those utilizing progressive reloading presses, where speed is key, a spray lube allows for rapid batch preparation, keeping up with the high output capabilities of these machines. It ensures consistent lubrication across every case fed into the sizing die.

Step-by-Step: How to Use RCBS Case Slick Spray Lube for Optimal Results

Achieving the best performance from your RCBS Case Slick Spray Lube is straightforward. Follow these simple steps for effective and hassle-free case sizing:

1. Prepare Your Cases: Ensure your fired brass cases are clean and free of significant debris. Lay them out in a single layer on a reloading block, tray, or flat surface. For rifle cases, it's often recommended to stand them upright for the initial spray.
2. Shake the Can: Give the aerosol can a good shake before use to ensure the lubricant is properly mixed and ready for application.
3. Apply Evenly: Holding the can approximately 8-12 inches (20-30 cm) away from the cases, apply a light, even mist over all the cases.
   • For rifle cases standing upright, spray from multiple angles to ensure full coverage of the case body and neck.
   • For pistol cases or cases lying flat, spray one side, then roll them over and spray the other side for complete coverage.
   • Important: Use a light coat. Over-application can lead to dimpled shoulders on bottle-neck cases or excessive residue. A fine, almost invisible film is all that's needed.
4. Allow to Dry (Briefly): Let the lubricant sit on the cases for a minute or two. This allows the carrier solvent to evaporate, leaving behind the slick lubricating film. You'll notice a slightly duller finish on the brass.
5. Begin Sizing: Once the cases are lightly coated and the solvent has evaporated, you can begin your sizing operation. You'll immediately notice the reduced effort required to size your cases.
6. Post-Sizing Cleanup: After sizing, it's recommended to remove the lubricant from your cases before subsequent reloading steps (e.g., priming, powder charging). This is easily done by tumbling the cases in a vibratory or rotary tumbler with appropriate media (corn cob, walnut, steel pins) or by wiping them down with a cloth.

Following these instructions will help you answer the question, "How do I properly lubricate brass for reloading?" with confidence and consistent results.

Beyond Sizing: Versatile Applications for Reloaders

While its primary function is case sizing, the RCBS Case Slick Spray Lube offers versatility that extends to other critical reloading tasks:

• Case Forming: For reloaders engaging in wildcat cartridge development or forming cases from one caliber to another (e.g., .30-06 Springfield to .270 Winchester), the extreme pressures involved necessitate superior lubrication. This spray lube provides the necessary protection against galling and tearing during the rigorous case forming process.
• Bullet Swaging: When forming lead bullets or jackets, proper lubrication is essential to prevent lead buildup and ensure smooth operation of swaging dies. A light application can aid in these specialized tasks.
• Protecting Your Dies: While the lube's main job is on the brass, its consistent use ensures less metal-on-metal friction within your dies, contributing to their longevity. A clean die, regularly used with proper lubrication, will perform reliably for many years.

RCBS: A Legacy of Reloading Excellence

For over 70 years, RCBS has been a cornerstone of the reloading community, earning a reputation for producing high-quality, durable, and innovative reloading equipment. Founded by Fred Huntington in Oroville, California, RCBS (Rock Chuck Bullet Swage) started by making swaging dies for bullet casting. Today, it offers a comprehensive line of presses, dies, powder measures, scales, and accessories, all designed to make the reloading process safer, more efficient, and more enjoyable.

The RCBS Case Slick Spray Lube 4 oz (UPC: 076683093154) is a testament to this legacy. It embodies the brand's commitment to reliability and user-friendliness, providing reloaders with a product they can trust to protect their investment in brass and dies, while ensuring consistent, high-quality ammunition production. When you choose RCBS, you're not just buying a product; you're investing in decades of expertise and a commitment to the reloading craft.

Why Choose RCBS Case Slick Spray Lube?

When faced with choices like "What is the best case lube for rifle brass?" or "How can I avoid getting cases stuck in my sizing die?", the RCBS Case Slick Spray Lube consistently emerges as a top recommendation for several compelling reasons:

• Unmatched Convenience: Its spray-on application drastically cuts down on prep time compared to traditional methods, allowing you to process more cases in less time.
• Superior Protection: It creates an ultra-slick barrier that safeguards both your valuable brass cases from stretching or tearing and your expensive sizing dies from galling and wear. This extends the life of both components, saving you money in the long run.
• Consistent Results: The even coating ensures uniform sizing, which is crucial for producing accurate and reliable ammunition. Consistency in every step of reloading leads to consistency downrange.
• Clean Operation: The formula is designed to minimize messy residue on your cases and dies, making post-sizing cleanup a breeze.
• Trusted Brand: Backed by the long-standing reputation of RCBS, a leader in the reloading industry, you can be confident in the product's performance and quality. This isn't just any lube; it's a solution from a company that understands reloaders' needs.

In summary, for any reloader seeking to optimize their case preparation, streamline their process, and protect their valuable equipment, the RCBS Case Slick Spray Lube 4 oz (Product No. 9315) is an indispensable tool. It provides a reliable, efficient, and easy-to-use solution for one of the most critical steps in metallic cartridge reloading. Ensure your reloading efforts are smooth and successful with this essential lubricant, readily available at DEGuns.

Product Specifications

Feature	Detail
Product Name	RCBS Case Slick Spray Lube
Product No.	9315
Volume	4 oz (approximately 118 ml)
Application	Aerosol Spray
Primary Use	Lubricating metallic cartridge cases for sizing and forming
Key Benefits	Prevents stuck cases, reduces sizing effort, protects dies and brass
UPC	076683093154
Availability	Available at DEGuns